| The GPS SuperStore.™ Since 1994. |
 |
USA & International |
 |
|
| You are currently shopping on our GPS City USA website, which ships to the USA and Internationally. To shop on our Canada website, which ships to Canada only, please click the green button above. Prices will be in CAD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
Dual Apple iPod Touch Suction Cup Mount with XGPS Receiver Specifications |
Please find below additional technical documentation and/or specifications for this item. This documentation may take the form of mechanical drawings, installation manuals, instruction manuals, and a table of specifications. |
| Disclaimer: Specifications shown are subject to change by the manufacturer without notice. Information provided is believed correct and true to the best of our ability, however, GPS City is not responsible
for typographical errors or incorrect data. To report any errors, please use the feedback form. |
| General |
| 1 |
Unit dimensions, WxHxD: |
2.25 x 2.25 x .75 inches (5.7 x 5.7 x 1.9 cm) |
| 2 |
Weight: |
1.8 oz (51 g) |
| 3 |
Battery: |
rechargeable lithium-ion |
| 4 |
Battery life: |
up to 8.5 hours; recharges in 2.5 hours |
| 5 |
Waterproof: |
No |
| 6 |
GPS-enabled: |
Yes |
| 7 |
Floats: |
No |
| 8 |
High-sensitivity receiver: |
Yes |
| 9 |
PC interface: |
USB |
| 10 |
RoHS version available: |
No |
| 11 |
Preloaded maps: |
No |
| 12 |
Ability to add maps: |
No |
| 13 |
Street Map Compatible: |
No |
| 14 |
Topographic Map Compatible: |
No |
| 15 |
Marine Software Compatible: |
No |
| 16 |
Bluechart g2 Map Compatible: |
No |
| 17 |
Bluechart g2 Vision Map Compatible: |
No |
| 18 |
Built-in memory: |
NONE |
| 19 |
Accepts data cards: |
No |
| 20 |
Additional: |
- 65-channel SkyTraq GPS chipset
- Accuracy: +/-2.5m (CEP)
- Fast location acquisition times: under 30 secs (warm or cold start)
- Position updates: at least once per second
- Maximum speed: 1000 kts / 1150 mph
- Maximum altitude: 18,000 m / 59,000 ft
- Bluetooth range: 33 ft / 10m
- Operating temperature: 14˚F - 140˚F (-10˚C - 60˚C)
|
| 21 |
Garmin Connect™ compatible (online community where you analyze, categorize and share data): |
No |
| 22 |
Custom Maps Compatible |
No |
| Marine |
| 23 |
NMEA input/output |
Yes (NMEA 0183) |
XG-RAM-B-166-AP7U |
The RAM-B-166-AP7 fits your Apple iPod Touch (Generation 2, 3, and 4). The Windshield Suction RAM Mount is a Marine Grade Aluminum Mount with a Locking Suction Cup Base and RAM Custom Plastic Cradle. The mount is designed with a RAM 1 inch diameter patented rubber ball and socket system that has adjustment point at the cradle and base. With a twist of the arm knob, you can move the Apple iPod Touch Series mount to your optimum viewing position.
Note: This mount does not require any drilling for installation.
Apple iPod and iPhone Identity and Mount Page:
 If you are unsure of what model Apple iPad, iPod classic, iPod nano, iPod mini, iPod touch or iPhone you have, now you can review your Apple device features on our Apple iPod, iPad and iPhone Identify Page. Once you identify your Apple iPod, iPad or iPhone, you can the select the right mount for your model.
Apple iPod Touch G2 Mount Options:
To help ensure you have the Apple iPod Touch G2 Mount you require, take a look at the list of available RAM Apple iPod Touch G2 mounts on the Apple iPod Touch G2 Mount Page. Here you can select from iPod suction cup mounts, flat surface screw down iPod mounts, iPod car mounts, non skid weighted iPod mounts and more bundled with the RAM-HOL-AP7 Apple iPod Touch G2 Cradle.
Apple iPod Touch G2 Mount Cradle Design:
 The RAM-HOL-AP7 Apple iPod touch 2nd Generation RAM Mount Cradle is a High Strength Plastic Composite Cradle designed specifically to hold the Apple iPod touch G2 Series units including the Apple iPod touch 8GB (G2), iPod touch 16GB (G2) and Apple iPod touch 32GB (G2).
The cradle is open at the top and bottom to allow you to connect head phones and required cables plus use all of the required buttons. When mounting the iPod touch cradle to a RAM Mount with their patented ball and socket system, you can easily display your iPod touch in landscape or portrait view.
Apple iPod Touch G2 Mount Cradle Plate:
 The RAM-B-238 Marine Grade Aluminum Diamond Plate is designed to connected to the back of the mount cradle. The diamond plate has a 1.0 inch diameter rubber ball connected at right angles to the plate, which connects directly to the 1 inch arm socket. The cradle includes the required hardware to connect the plate to the cradle. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the RAM-B-238 Design Drawings (pdf file).
Apple iPod Touch G2 Mount Arm Design:
 The RAM-B-201 RAM Mount Marine Grade Aluminum Dual Socket Arm is a 1 inch B size Ball Socket Arm with open socket ends. The arm is 3.0 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAM-B-201 arm, take a closer look with the RAM-B-201 Design Drawings (pdf file).
Apple iPod Touch G2 Mount Base Design:
 The RAM-B-224-1 RAM Mount Plastic Locking 3.25 inch diameter Rubber Suction Cup Base, with Marine Grade Aluminum Diamond Plate, is designed to have an extra strong hold on any smooth non-porous surface. With a twist on the locking knob, the suction cup base adheres to any glass¹ or non-porous plastic surface, as found on our Non Skid Base with Plastic Disk and Plastic Adhesive Disk.
Connected to the top of the Suction Cup is a RAM-B-238 RAM Mount Marine Grade Aluminum Diamond Plate with 1 inch diameter Rubber Ball. This plate allows the suction cup to join to an open socket found on the RAM 1 inch diameter socket arms.
¹ Important legal note to California and Minnesota Drivers
Suction Cup Base Mounting Options:We currently offer three alternative solutions for mounting your suction cup mount in a location other than a windshield:
 The Super Grip Non Skid Base with round plastic plate, is a weighted base that can be placed on your dash without an adhesive or drilling. Simply place the base on your dash, or any flat surface and then attach the suction cup to the round plastic plate. This is perfect when you want a temporary mounting solution but the windshield mount just isn't the answer.
 The Suction Cup Adhesive Disk with round plastic plate, is a great mounting surface to attach the RAM Twist Lock Suction Cup. Simply stick the the plate to any flat surface and then attach the suction cup to the plate. This is perfect when you need to attach your suction cup mount to your car dash vertically or horizontally, rather than to your windshield.
 The Suction Cup Drink Cup Holder with round plastic plate, is a great mounting surface to attach the RAM Twist Lock Suction Cup. Simply place the base into any cup holder in your vehicle and then attach the suction cup to the plate found on top. This is perfect when you need to attach your suction cup mount away from the windshield or when you just want the mount off the dash. |
|
|
|
|
