Canadian Customers! Save on shipping fees, customs, duty,
and PST! Buy this item from Canada's original on-line GPS store,
gpscity.ca,
located in Calgary, Alberta.
RAM Mount Diamond Plate with Rail Mount Product Detail
Call us at 1-866-GPS-CITY (1-866-477-2489) from 8AM - 5PM PST, Mon-Fri
RAM Mount Diamond Plate with Rail Mount Description The High Strength Plastic Rail Mount consists of a locking tooth system with a standard RAM diamond plate end. The mount will fit a rail diameter from 1.0'' to 1.1''.
To mount to a circular rail, simple press the plastic 'U' clamp around the rail and then connect and tighten the small nut and bolt to close the 'U' clamp. Next connect the diamond plate to the mounted clamp at the required angle and screw in the other bolt through the diamond plate. Now you are ready to connect any of the RAM Plastic HOL Cradles or any other cradle with two holes positioned 1.912'' center to center.
Placing a rubber lining (not included) between the tube and the mount for a tube with a diameter less than 1'' will help the base 'grab' the rail.
NOTE: You cannot rotate the diamond plate on the 'U' clamp when the cradle is connected.
IMPORTANT NOTE FOR MOTORCYCLES USERS: This base is not recommended for Motorcycles due to the heavy vibration.