Canadian Customers! Save on shipping fees, customs, duty,
and PST! Buy this item from Canada's original on-line GPS store,
gpscity.ca,
located in Calgary, Alberta.
RAM Mount Garmin nuvi 2xxW and nuvi 465T Locking Suction Cup Mount Product Detail
What's Included With The RAM Mount Garmin nuvi 2xxW and nuvi 465T Locking Suction Cup Mount? The RAM Mount Garmin nuvi 2xxW and nuvi 465T Locking Suction Cup Mount ships with the following items included:
RAM Mount Garmin nuvi 2xxW and nuvi 465T Locking Suction Cup Mount Description The RAM-B-166-GA25 RAM Mount Marine Grade Aluminum Mount with Locking Suction Base consists of the 1 inch diameter ball and socket system with RAM Plastic Cradle for the Garmin nuvi 200W, nuvi 205W and nuvi 465T Series.
Garmin GPS Mount Options:
To help ensure you have the Garmin nuvi 205W, nuvi 255W, nuvi 200W, nuvi 250W, nuvi 260W and nuvi 465T Mount you require, take a look at the list of available RAM Garmin GPS mounts on the RAM-HOL-GA25 Series of Garmin nuvi 2xxW, nuvi 2x5W and nuvi 465T Cradles and Mounts Page. Here you can select from suction cup GPS mounts, flat surface screw down GPS mounts, GPS car mounts, non skid weighted GPS mounts and more bundled with the RAM-HOL-GA25 Garmin nuvi 2xxW, nuvi 2x5W and nuvi 465T Series Cradle.
Garmin GPS Mount Cradle Design:
The RAM-HOL-GA25 RAM Mount High Strength Plastic Cradle is designed to hold the Garmin nuvi 2xxW (wide), nuvi 2x5W (wide) and nuvi 2x5WT (wide) Series, including the following GPS units,
Garmin nuvi 200W
Garmin nuvi 205W
Garmin nuvi 250W
Garmin nuvi 255W
Garmin nuvi 260W
Garmin nuvi 265WT
Garmin nuvi 465T
The cradle will fit around the Garmin cradle that is included with the purchase of the Garmin nuvi 2xxW and nuvi 465T series unit. All cables can stay connected to the unit while in the RAM cradle.
The RAM-B-238 Marine Grade Aluminum Diamond Plate is designed to connected to the back of the mount cradle. The diamond plate has a 1.0 inch diameter rubber ball connected at right angles to the plate, which connects directly to the 1 inch arm socket. The cradle includes the required hardware to connect the plate to the cradle. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the RAM-B-238 Design Drawings (pdf file).
Garmin GPS Mount Arm Design:
The RAM-B-201 RAM Mount Marine Grade Aluminum Dual Socket Arm is a 1 inch B size Ball Socket Arm with open socket ends. The arm is 3.0 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAM-B-201 arm, take a closer look with the RAM-B-201 Design Drawings (pdf file).
Garmin GPS Mount Base Design:
The RAM-B-224-1 RAM Mount Plastic Locking 3.25 inch diameter Rubber Suction Cup Base, with Marine Grade Aluminum Diamond Plate, is designed to have an extra strong hold on any smooth non-porous surface. With a twist on the locking knob, the suction cup base adheres to any glass¹ or non-porous plastic surface, as found on our Non Skid Base with Plastic Disk and Plastic Adhesive Disk.
Connected to the top of the Suction Cup is a RAM-B-238 RAM Mount Marine Grade Aluminum Diamond Plate with 1 inch diameter Rubber Ball. This plate allows the suction cup to join to an open socket found on the RAM 1 inch diameter socket arms.
We currently offer three alternative solutions for mounting your suction cup mount in a location other than a windshield:
The Super Grip Non Skid Base with round plastic plate, is a weighted base that can be placed on your dash without an adhesive or drilling. Simply place the base on your dash, or any flat surface and then attach the suction cup to the round plastic plate. This is perfect when you want a temporary mounting solution but the windshield mount just isn't the answer.
The Suction Cup Adhesive Disk with round plastic plate, is a great mounting surface to attach the RAM Twist Lock Suction Cup. Simply stick the the plate to any flat surface and then attach the suction cup to the plate. This is perfect when you need to attach your suction cup mount to your car dash vertically or horizontally, rather than to your windshield.
The Suction Cup Drink Cup Holder with round plastic plate, is a great mounting surface to attach the RAM Twist Lock Suction Cup. Simply place the base into any cup holder in your vehicle and then attach the suction cup to the plate found on top. This is perfect when you need to attach your suction cup mount away from the windshield or when you just want the mount off the dash.
Canadian Customers! Save on shipping fees, customs, duty,
and PST! Buy 
The RAM-B-238 Marine Grade Aluminum Diamond Plate is designed to connected to the back of the mount cradle. The diamond plate has a 1.0 inch diameter rubber ball connected at right angles to the plate, which connects directly to the 1 inch arm socket. The cradle includes the required hardware to connect the plate to the cradle. For a layout of the hole spacing and 1.0 inch rubber ball location, take a closer look with the 
The RAM-B-201 RAM Mount Marine Grade Aluminum Dual Socket Arm is a 1 inch B size Ball Socket Arm with open socket ends. The arm is 3.0 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends. For a layout of the dimensions RAM-B-201 arm, take a closer look with the 
The RAM-B-224-1 RAM Mount Plastic Locking 3.25 inch diameter Rubber Suction Cup Base, with Marine Grade Aluminum Diamond Plate, is designed to have an extra strong hold on any smooth non-porous surface. With a twist on the locking knob, the suction cup base adheres to any glass¹ or non-porous plastic surface, as found on our Non Skid Base with Plastic Disk and Plastic Adhesive Disk.
