| The GPS SuperStore.™ Since 1994. |
 |
USA & International |
 |
|
| You are currently shopping on our GPS City USA website, which ships to the USA and Internationally. To shop on our Canada website, which ships to Canada only, please click the green button above. Prices will be in CAD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
Customer Reviews and Ratings for RAM Mount Garmin nuvi 7xx Vehicle Floor Mount |
 |
Click here to Add Your Own Review. It's quick and easy. No login required.
100% of our reviewers recommend this item.
|
| |
| |
Drive Safe
KDFW
Dec 17, 2009
|
RAM MOUNT GARMIN NUVI 7XX VEHICLE FLOOR MOUNT
Pros: none
Cons: set screws at the seat rails can get get loose.
If one is looking for the best, most stable mount available, then the RAM Mount Garmin nuvi 7xx Vehicle Floor Mount is the one.
Your GPS will stay out of the way of airbags, making your drive safer.
Unlike window mounts that CAN fly off in an accident and possibly become lethal, you will never have that problem with this mount.
Be aware that the flexible are is stiff and can require a little muscle to make bend.
This was installed in a 2010 Ford Focus, where space is a premimum. Also installed in a Ford Windstar and Dodge Caravan.
Installation - undo the four nuts that hold the seat in place, lift the seat up, place the mount over one of the front screws (left front), lower the seat, rebolt the four nuts after applying some light oil or dry lube, and then bend (adjust) the mount to your liking.
Total time, about 15 to 20 minutes. No big deal!
You can also use tie wraps to secure your power cable for a neat installation.
One other note, you can also run the power cable through the flexible plastic tubing, but you may need to pay $2 extra, at your auto supply store for the split wire loom.
Drive safe and make the roads better for everyone.
Recommend? YES
61 viewers found this helpful.
|
| |
JP
Hampshire, IL (50 mi. west of Chicago)
Aug 31, 2009
|
EXCELLENT GPS MOUNT
I installed this mount in my Honda S2000. It attached to the front end of the left seat rail of the passenger seat. It holds the GPS (Garmin 780) in a position so that it is visible to both people in the car. The mount does not come with the bolts necessary to hold it to the seat rail. I found that 1/4" carriage bolts fit in the seat rail and hold the base very nicely. The base (the L-shaped part at the far end from the GPS) is a very substantial piece of steel. I used two steel fender washers between the rail and the nut. I had to cut about 3" from the length of the rod. It isn't hard to bend the rod to the shape you want, but it takes a vise to hold it while you bend it. The GPS wiggles a tiny bit since it is on the end of a long stalk, but it isn't a problem.
Recommend? YES
70 viewers found this helpful.
|
| |
Mike
Halifax, NS
Apr 15, 2009
|
GREAT FLOOR TYPE MOUNT
Pros: gets the wires etc off the dash!!!! tidy unit.
Cons: set screws securing the rod tend to loosen.
While this unit isn't connected to the floor (mounts to the seat where it is bolted to the seat rail) it gets everything out off the line of sight for safer driving. I have had a number of other RAM mounts that were connected to either the air vent or suctioned to the windshield. This one is the best I have had!
Recommend? YES
92 viewers found this helpful.
|
|
|
|
|
|
