Canadian Customers! Save on shipping fees, customs, duty,
and PST! Buy this item from Canada's original on-line GPS store,
gpscity.ca,
located in Calgary, Alberta.
RAM Mount Garmin Swivel Suction Cup Mount RAM-B-166-G2U Product Detail
What's Included With The RAM Mount Garmin Swivel Suction Cup Mount RAM-B-166-G2U? The RAM Mount Garmin Swivel Suction Cup Mount RAM-B-166-G2U ships with the following items included:
RAM Mount Garmin Swivel Suction Cup Mount RAM-B-166-G2U Description The RAM-B-166-G2 RAM Mount Marine Grade Aluminum Mount with 3.25'' Locking Suction Base consists of the 1 inch diameter ball and socket system with a RAM Round 2.5 inch diameter Plate End and Garmin Marine Cradle Three Hole hardware.
This mount is designed to be connected to the three hole pattern on the bottom of the cradles included with the purchase of the Garmin Marine GPS units with a swivel mount.
BASE DESIGN:
The RAM-B-224-1 RAM Mount Plastic Locking 3.25 inch diameter Rubber Suction Cup Base, with Marine Grade Aluminum Diamond Plate, is designed to have an extra strong hold on any smooth non-porous surface. With a twist on the locking knob, the suction cup base adheres to any glass¹ or non-porous plastic surface, as found on our Non Skid Base with Plastic Disk and Plastic Adhesive Disk.
Connected to the top of the Suction Cup is a RAM-B-238 RAM Mount Marine Grade Aluminum Diamond Plate with 1 inch diameter Rubber Ball. This plate allows the suction cup to join to an open socket found on the RAM 1 inch diameter socket arms.
We currently offer three alternative solutions for mounting your suction cup mount in a location other than a windshield:
The Super Grip Non Skid Base with round plastic plate, is a weighted base that can be placed on your dash without an adhesive or drilling. Simply place the base on your dash, or any flat surface and then attach the suction cup to the round plastic plate. This is perfect when you want a temporary mounting solution but the windshield mount just isn't the answer.
The Suction Cup Adhesive Disk with round plastic plate, is a great mounting surface to attach the RAM Twist Lock Suction Cup. Simply stick the the plate to any flat surface and then attach the suction cup to the plate. This is perfect when you need to attach your suction cup mount to your car dash vertically or horizontally, rather than to your windshield.
The Suction Cup Drink Cup Holder with round plastic plate, is a great mounting surface to attach the RAM Twist Lock Suction Cup. Simply place the base into any cup holder in your vehicle and then attach the suction cup to the plate found on top. This is perfect when you need to attach your suction cup mount away from the windshield or when you just want the mount off the dash.
ARM DESIGN: The Powder Coated Marine Grade Aluminum Standard Length Double Socket Arm is 3.0'' long when measured between socket centers.
CRADLE DESIGN:
The RAM Aluminum 2.5 inch diameter Round Plate has an three hole pattern which will connect to the base of the Garmin Marine GPS unit swivel mounts. In most cases the Garmin Marine Swivel Mount is included with the purhcase of the GPS unit. Some of the Garmin Marine GPS that will connect to this mounting plate include: Marine Season 2007
Garmin GPSMAP 420 Marine GPS
Garmin GPSMAP 430 Marine GPS
Garmin GPSMAP 440 Marine GPS
Garmin GPSMAP 450 Marine GPS
Garmin GPSMAP 520 Marine GPS
Garmin GPSMAP 525 Marine GPS
Garmin GPSMAP 530 Marine GPS
Garmin GPSMAP 535 Marine GPS
Garmin GPSMAP 540 Marine GPS
Garmin GPSMAP 545 Marine GPS
Garmin GPSMAP 550 Marine GPS
Garmin GPSMAP 555 Marine GPS
Marine Season 2006
Garmin GPSMAP 292 Marine GPS
Garmin GPSMAP 298 Marine GPS
Garmin GPSMAP 392 Marine GPS
Garmin GPSMAP 398 Marine GPS
Garmin GPSMAP 492 Marine GPS
Garmin GPSMAP 498 Marine GPS
Garmin Fishfinder 340C
Garmin Fishfinder 160C
Garmin Fishfinder 140
Garmin Fishfinder 90
NOTE: The Garmin cradles listed are included with the purchase of each GPS unit, or can purchased separately.
Canadian Customers! Save on shipping fees, customs, duty,
and PST! Buy 
The RAM-B-224-1 RAM Mount Plastic Locking 3.25 inch diameter Rubber Suction Cup Base, with Marine Grade Aluminum Diamond Plate, is designed to have an extra strong hold on any smooth non-porous surface. With a twist on the locking knob, the suction cup base adheres to any glass¹ or non-porous plastic surface, as found on our Non Skid Base with Plastic Disk and Plastic Adhesive Disk.
