| The GPS SuperStore.™ Since 1994. |
 |
USA & International |
 |
|
| You are currently shopping on our GPS City USA website, which ships to the USA and Internationally. To shop on our Canada website, which ships to Canada only, please click the green button above. Prices will be in CAD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
RAM Mount Garmin Swivel Yoke Mount RAM-B-121-G2U Specifications |
Please find below additional technical documentation and/or specifications for this item. This documentation may take the form of mechanical drawings, installation manuals, instruction manuals, and a table of specifications. |
RAM-B-121-G2U |
The RAM-B-121-G2 RAM Mount Marine Grade Aluminum Yoke Clamp Mount consists of the 1 inch diameter ball and socket system with a RAM Round 2.5 inch diameter Plate End and Garmin Marine GPS connection hardware. This mount is designed to be connected to the Garmin Marine GPS units with a three hole patten on the base of the swivel mount.
Mount Base Design:
 The RAM-B-121B RAM Mount Powder Coated Marine Grade Aluminum Yoke Clamp Mount Base fits a rail diameter from 5/8 inch to a maximum of 1 1/4 inches. The 1 inch rubber ball is at a right angle to the plane of the mount so when connected to a rail, the ball sits parallel to the rail. To mount the base, simply place the yoke clamps around the rail and then screw the large knob at the end of the threaded rod. The hand tightened clamp makes this the perfect mounting system for rental planes and unusual shaped motorbike rails.
NOTE: The rail does not need to be perfectly round to mount this base.
Mount Arm Design:
 The RAM Mount Dual Socket Arm (RAM-B-201) is a B Size 1 inch Ball Dual Socket Arm, made of Marine Grade Aluminum. The arm is 3 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends.
Mount Cradle Design
The RAM Aluminum 2.5 inch diameter Round Plate has an three hole pattern which will connect to the base of the Garmin Marine GPS unit swivel mounts. In most cases the Garmin Marine Swivel Mount is included with the purhcase of the GPS unit. Some of the Garmin Marine GPS that will connect to this mounting plate include:
Marine Season 2007
- Garmin GPSMAP 420 Marine GPS
- Garmin GPSMAP 430 Marine GPS
- Garmin GPSMAP 440 Marine GPS
- Garmin GPSMAP 450 Marine GPS
- Garmin GPSMAP 520 Marine GPS
- Garmin GPSMAP 525 Marine GPS
- Garmin GPSMAP 530 Marine GPS
- Garmin GPSMAP 535 Marine GPS
- Garmin GPSMAP 540 Marine GPS
- Garmin GPSMAP 545 Marine GPS
- Garmin GPSMAP 550 Marine GPS
- Garmin GPSMAP 555 Marine GPS
Marine Season 2006
- Garmin GPSMAP 292 Marine GPS
- Garmin GPSMAP 298 Marine GPS
- Garmin GPSMAP 392 Marine GPS
- Garmin GPSMAP 398 Marine GPS
- Garmin GPSMAP 492 Marine GPS
- Garmin GPSMAP 498 Marine GPS
- Garmin Fishfinder 340C
- Garmin Fishfinder 160C
- Garmin Fishfinder 140
- Garmin Fishfinder 90
NOTE: The Garmin cradles listed are included with the purchase of each GPS unit, or can purchased separately.
Connection Hardware Included: The plate includes a set of three sets of nuts and bolts (RAM-S-G1) to connect the plate to your required cradle. |
|
|
|
|
