| The GPS SuperStore.™ Since 1994. |
 |
USA & International |
 |
|
| You are currently shopping on our GPS City USA website, which ships to the USA and Internationally. To shop on our Canada website, which ships to Canada only, please click the green button above. Prices will be in CAD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
RAM Mount iWay 600C Motorcycle Brake Mount RAM-B-174-LO4U Specifications |
Please find below additional technical documentation and/or specifications for this item. This documentation may take the form of mechanical drawings, installation manuals, instruction manuals, and a table of specifications. |
RAM-B-174-LO4U |
The RAM-B-174-LO4 RAM Mount Marine Grade Aluminum Motorcycle Brake/Clutch Base Mount consists of the 1 inch diameter RAM ball and socket system with RAM Plastic CPlate Connector for the Lowrance iWay 500C and 600C.
Mount Cradle Design:
The RAM-HOL-LO4 RAM Mount Aluminum Diamond Plate with Hardware connects directly to the back of the GPS or the diamond shaped recess in the cooling fans on the back of the GPS. To connect the plate you may need to remove the included mount from the back of the GPS, and using the hardware, attach the RAM-HOL-LO4 Diamond Plate to the GPS. Now you have a RAM 1 inch ball to connect directly to the LO4 mount. This mounting plate connects to the back of the following Lowrance GPS units:
- Lowrance iWay 500C
- Lowrance iWay 600C
- Lowrance AirMap 2000 Aviation Series
All cables can stay connected to the unit while connected to the RAM cradle plate.
Mount Arm Design:
 The RAM Mount Dual Socket Arm (RAM-B-201) is a B Size 1 inch Ball Dual Socket Arm, made of Marine Grade Aluminum. The arm is 3 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends.
Mount Base Design:
 The RAM-B-309-7 RAM Mount Motorcycle Kit Base can mount to either the clutch/ brake reservoir or directly to a round handle bar rail. The base is constructed of marine grade aluminum with an integrated 1 inch diameter rubber ball, hardware for rail mounting and both standard and metric mounting bolts for motorcycle reservoir mounting. The zinc coated metal u-bolt and nuts included are designed it fit on most motorcycle round handlebars, or any circular rail or pipe with diameter from 1/2 to 1.25 inches.
The base connects to the left or right side of your handlebar clutch/brake reservoir on the Honda Goldwing and other select motorcycles or you can connect directly to your handlebars with the u-bolt hardware. To see if this base will work with your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94 inches and a maximum of 1.58 inches. |
|
|
|
|
