| The GPS SuperStore.™ Since 1994. |
 |
USA & International |
 |
|
| You are currently shopping on our GPS City USA website, which ships to the USA and Internationally. To shop on our Canada website, which ships to Canada only, please click the green button above. Prices will be in CAD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
RAM Mount Lowrance iWay 600C Zinc U-Bolt Rail Mount Specifications |
Please find below additional technical documentation and/or specifications for this item. This documentation may take the form of mechanical drawings, installation manuals, instruction manuals, and a table of specifications. |
RAM-B-149Z-LO4U |
The RAM-B-149Z-LO4 RAM Mount Marine Grade Aluminum Mount with Zinc Coated U-Bolt Rail Base consists of the 1'' dia. ball and socket system with RAM Plastic Male Plate for the Lowrance iWay 500C and iWay 600C.
Mount Base Design:
 The RAM-B-231Z RAM Mount Powder Coated Marine Grade Aluminum Rail Base has a 1.0 inch diameter Rubber Ball designed to sit at right angles to the mounting rail. The Zinc Coated metal U-Bolt and nuts included are designed it fit on most motorcycle round handlebars, or any circular rail or pipe with diameter from 3/4 to 1.0 inch.
To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black rubber covers over the exposed ends of the u-bolt.
Note: If you are looking to use this mount in the elements, we suggest the RAM-B-231 Stainless Steel U-Bolt Mount.
Mount Arm Design:
 The RAM Mount Dual Socket Arm (RAM-B-201) is a B Size 1 inch Ball Dual Socket Arm, made of Marine Grade Aluminum. The arm is 3 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends.
Mount Cradle Design:
The RAM-HOL-LO4 RAM Mount Aluminum Diamond Plate with Hardware connects directly to the back of the GPS or the diamond shaped recess in the cooling fans on the back of the GPS. To connect the plate you may need to remove the included mount from the back of the GPS, and using the hardware, attach the RAM-HOL-LO4 Diamond Plate to the GPS. Now you have a RAM 1 inch ball to connect directly to the LO4 mount. This mounting plate connects to the back of the following Lowrance GPS units:
- Lowrance iWay 500C
- Lowrance iWay 600C
- Lowrance AirMap 2000 Aviation Series
All cables can stay connected to the unit while connected to the RAM cradle plate. |
|
|
|
|
