| The GPS SuperStore.™ Since 1994. |
 |
USA & International |
 |
|
| You are currently shopping on our GPS City USA website, which ships to the USA and Internationally. To shop on our Canada website, which ships to Canada only, please click the green button above. Prices will be in CAD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
RAM Mount Magellan Roadmate Motorcycle Mount Kit RAM-B-174-MA4U Specifications |
Please find below additional technical documentation and/or specifications for this item. This documentation may take the form of mechanical drawings, installation manuals, instruction manuals, and a table of specifications. |
RAM-B-174-MA4U |
The RAM-B-174-MA4 RAM Mount Marine Grade Aluminum Motorcycle Brake/Clutch Base Mount consists of the 1 inch diameter RAM ball and socket system with RAM Aluminum Plate and Mounting Hardware to connect to the Magellan Roadmate Cradles. The cradle may be included with the purchase of your Roadmate, or you can purchase a second cradle if required.
Mount Cradle Design:
The RAM-B-202-MA4 Aluminum Rectangular Plate has a four hole pattern, and four screws, that will connect to the existing holes found on the back of the following cradles made by Magellan:
Note: The Magellan cradles listed may be included with the purchase of each GPS unit, or can purchased separately.
Connection Hardware Included:
The plate includes a set of four screws to connect the plate to the back of the Roadmate cradle.
Part Design Change:
This part originally shipped with a RAM Aluminum Diamond Plate (RAM-B-238) and two screws to connect diagonally with te Magellan Roadmate Cradles.
Mount Arm Design:
The RAM-B-201 Marine Grade Aluminum Dual Socket Arm has Dual B Size 1 inch Ball Sockets. The arm is 3 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends.
Mount Base Design:
 The RAM-B-309-7 RAM Mount Motorcycle Kit Base can mount to either the clutch/ brake reservoir or directly to a round handle bar rail. The base is constructed of marine grade aluminum with an integrated 1 inch diameter rubber ball, hardware for rail mounting and both standard and metric mounting bolts for motorcycle reservoir mounting. The zinc coated metal u-bolt and nuts included are designed it fit on most motorcycle round handlebars, or any circular rail or pipe with diameter from 1/2 to 1.25 inches.
The base connects to the left or right side of your handlebar clutch/brake reservoir on the Honda Goldwing and other select motorcycles or you can connect directly to your handlebars with the u-bolt hardware. To see if this base will work with your motorcycle, check the hole spacing of the base against your clutch/brake reservoir. The holes centers have a minimum width of 0.94 inches and a maximum of 1.58 inches. |
|
|
|
|
