| |
Keith
Vancouver, BC
May 28, 2012
|
GOOD SOLID MOUNT
Pros: fits well
Cons: none
Mounted on a 2010 BMW R1200GS for a GoPro camera or GPS. Fits well. No complaints.
Recommend? YES
0 viewers found this helpful. Was this review helpful to you?
Yes
No
|
| |
Anon
Montclair
Apr 26, 2012
|
MOUNT
Works great
Recommend? YES
4 viewers found this helpful. Was this review helpful to you?
Yes
No
|
| |
Paul
NC
Apr 2, 2012
|
EXCELLENT PART, DEFINITELY SERVES ITS PART
Pros: small, economical,very handy
Cons: none noticed thus far
This part is perfect for me, I wanted something that is not so obvious when I am not using the gps and remove the gps bracket and support arm, this little piece will not really even be noticeable.
Recommend? YES
5 viewers found this helpful. Was this review helpful to you?
Yes
No
|
| |
RideTriumph
Portland, Oregon
Mar 22, 2012
|
CAN BE BETTER
Pros: does what it says
Cons: black coating comes off easily
This item is just like it says. The problem I have with it is that these are aluminum with a black coating. The coating comes right off once you tighten these down. The flaking off black coating is annoying and ugly. Leave 'em plain or find a coating that works (or anodized!).
Recommend? YES
8 viewers found this helpful. Was this review helpful to you?
Yes
No
|
| |
Bob
Cincinnati
Mar 7, 2012
|
HANDY PRODUCT
Used to mount my Garmin 478 on Husky TE630. I like them better than bar clamp mounts.
Recommend? YES
9 viewers found this helpful.
|
| |
Chucky
Casa Grande, AZ
Feb 21, 2012
|
ANOTHER GREAT OPTION
Pros: great mounting option
Cons: none
After mulling over the numerous options for mounting my GPS, I decided on the Ram Mount base B-272U. It had the correct diameter hole which allowed it to be mounted on the handlebar mount near the stem. There were so many options to choose from, but i decided on this one because it would shield the GPS from the extremities and helps reduce vibration caused by mounting thee GPs at the handlebar ends.
Recommend? YES
9 viewers found this helpful.
|
| |
Robert
Colorado
Jan 1, 2012
|
WORKS WELL, BUT...
Pros: works well for my radar detector application
Cons: none at this time
The hole was too small for the OEM mirror screw on my 06 GSXR 750. I drilled out the hole and viola!
Recommend? YES
19 viewers found this helpful.
|
| |
Buzzsaw
Thunder Bay, ON
Nov 8, 2011
|
GPS BIKE MOUNT
Cons: paint missing under the ball, needs touching up.
Looks good on the bike, not big and clunky like the handlebar mount.
Recommend? YES
15 viewers found this helpful.
|
| |
Gordon
Chilliwack,B.C.
Sep 27, 2011
|
RAM MOUNT MINI MOTORCYCLE BASE
Pros: works well
Cons: poorly finished
fit very well and seems to quite sturdy as required. The surface finish particularly at the base of the ball was badly chipped and looked unfinished. Functional but not pleasing.
Recommend? YES
28 viewers found this helpful.
|
| |
Jeff
San Francisco, CA
Aug 22, 2011
|
OF ALL THE MOUNTS, THIS ONE IS THE BEST
Pros: nicely secure/stable, mounts to frame/sturdy spot
Cons: hole is too big so it's a bit sloppy
I use this mount more than all the others I purchased (which totaled over $130 so I tried a lot of them!) The hole is too big, but otherwise it's an excellent mount.
Recommend? YES
15 viewers found this helpful.
|
| |
Matt
New England
Jul 5, 2011
|
PERFECT HIDDEN MOUNT ON MOTORCYCLE
it hides well...no one notices...even on your show bike (assuming it's not all chrome).
Recommend? YES
30 viewers found this helpful.
|
| |
JP
Dallas
Jun 14, 2011
|
RAM MOUNT BASE 9MM HOLE RAM-B-272U
mount works perfectly for what I needed to mount my gps on my Yamaha Roadliner
Recommend? YES
28 viewers found this helpful.
|
| |
Searay3400
Michigan
Apr 19, 2011
|
RAM MOUNT
Pros: well made and works great.
Cons: none
Would like to see it pre drilled with a smaller hole and then I can drill the hole to the size I need.
Recommend? YES
40 viewers found this helpful.
|
| |
Wil
Kotzebue Alaska
Feb 28, 2011
|
RAM MOUNT MINI MOTORCYCLE MOUNT BASE 9MM HOLE RAM-
High quality and exact fit. Fast shipping.
Recommend? YES
49 viewers found this helpful.
|
| |
Honda Scoot
Ohio
Dec 5, 2010
|
BALL MOUNT FOR 2ND BIKE
Pros: mounts to almost anything with a hole and a bolt
I use our GPS on a Dual Sport. This little mount went on the National Cycle Fly Screen windshield of a cruiser for a quick easy mount for the second bike. Drilled a hole on center of the trim panel and this positions the GPS just above the stock gauges for a centered clean look behind the tiny windshield. When the GPS is not installed, this tiny mount is near invisible.
Recommend? YES
60 viewers found this helpful.
|
| |
KL
sherwood park, ab
Dec 1, 2010
|
BALL MOUNT
jury rigged a bracket mount when I could'nt seem to find a proper one worked well
Recommend? YES
69 viewers found this helpful.
|
| |
Briandude
Fremont CA
Nov 30, 2010
|
GOOD FOR DIRTBIKES
Pros: works great
Works good on my Honda crf450x. I bolted it to the handlebar clamp bolt. I needed the offset to fit the handlebar pad. Works great.
Recommend? YES
71 viewers found this helpful.
|
| |
mzalgaonker
cambridge, on
Nov 15, 2010
|
MOUNTED ON NINJA 250R
very easy to install, using it with an iphone 4 cradle on my 2009 kawasaki ninja 250r. works very well as intended
the only issue, but is to be expected, is you can't take video using this mount if you attach it to your windshield because it vibrates a lot and distorts the video. these vibrations however do not affect viewing the device attached (ie. i can still see my iphone screen perfectly fine and don't notice the vibrations)
Recommend? YES
105 viewers found this helpful.
|
| |
Josh
CA
Sep 20, 2010
|
PERFECT FIT
Used to mount GPS60csx to XT225 bar mount bolt. Fits perfect and allowed a nice low profile mount.
Recommend? YES
56 viewers found this helpful.
|
| |
Mountain Telecommuter
Turtletown, TN
Sep 6, 2010
|
PERFECT ON MIRROR MOUNT BOLT
Pros: angle, ram quality
Cons: none
Thought was going to use on KLRDash, but instead it fit perfectly on the left hand mirrors bolt (did get a little longer bolt) and has been rock steady with several implements (an Aqua box, a Delorme P60 holder, and a Garmin Nuvi holder using a 1.75" and/or 3" arm. The angle provides just enough built-in separation from other gear of handlebar hard parts. Also, GPScity has great pricing and is a worry-free company to do online business with!
Recommend? YES
57 viewers found this helpful.
|
| |
Trevor
Barrie, Ontario Canada
Aug 24, 2010
|
+1 FOR NINJA 250R
Bought this and a couple other parts based on a review saying that this worked well on my 2010 Kawasaki Ninja 250r. I mounted mine to the upper dash bolt as recommended, and with the RAM Long arm B socket it puts my iPhone practically dead center of the cluster. I think if I were to do it again, I might go with 2 of the shorter arms and a double ball joint to get the phone to sit a little further back under the windscreen, but this setup works great for the time being.
Recommend? YES
77 viewers found this helpful.
|
| |
Cord
Milwaukee
Jul 23, 2010
|
RECOMMEND USING THIS MOUNT FOR HARLEY'S
Pros: clean
Cons: none
Just a standard ball mount, however if you have a Harley, this mount is a much cleaner option than the clamp mount. Simply unbolt the mirror stem and then install it on the stem. I have two Nightsters, one with the mirrors flipped and the other with them in the stock location. The mount worked on both.
Recommend? YES
61 viewers found this helpful.
|
| |
Rob V
Toronto, Ontario
Jul 20, 2010
|
BEST FOR NINJA 250R
Pros: perfect angle and hole size to fit my ninja 250r.
I recommend this little mount base if you have a 08-10 Ninja 250r. Put this under your upper left or right upper dash bolts and you've got a GPS mount you can hide under your windshield. Currently using this with my waterproof Nuvi 550 and it's working very well. I would probably recommend using loc-tite on the threads of the bolt when putting it back in. Don't want the mount to fall out.
Recommend? YES
95 viewers found this helpful.
|
| |
RAM Mount User
Not Offered
Jul 5, 2010
|
WORKS GREAT!
Pros: low profile, clean looking install. very stable.
Works very well on handlebar mount bolt. Be careful when torquing down bolts with High Torque requirements. The mount is aluminum and will crack if you over-tighten it.
Recommend? YES
78 viewers found this helpful.
|
| |
Bret
Pleasanton, CA
May 19, 2010
|
VERY SIMPLE VERY GOOD
This mount is great for those that don't need or want your GPS mounted on the bike all the time. Very simple to mount under the mirror stem and it is out of the way. When the GPS is not on the mount you don't even notice it, keeps the bike clean and uncluttered.
Recommend? YES
83 viewers found this helpful.
|
| |
dj
denver, co
May 12, 2010
|
RAM MOUNT
I put this on my Suzuki DL650 to hold a GPS unit and it works great. Attached it to one of the 4 holes for the handlebar mount and had to get a slightly longer bolt at the hardware store. This mount replaced a front brake reservoir mount that was a gift. I felt that mount had more potential to damage the reservoir so I bought this base to replace it. So far the mini mount has been very stable and I'm not worried about vibration or other potential damage. Seems like this is a versatile mount and could be put in several different places if needed. Express mounts has very fast shipping and reasonable prices. This is the second item I've bought from them and have been very satisfied.
Recommend? YES
69 viewers found this helpful.
|
| |
Britt
Westmont, IL
May 3, 2010
|
WORKED GREAT ON MY CBR1100XX
This worked great to mount my GPS to the upper bolt on my left clip-on. It puts my GPS right in the lower center of my dash.
Recommend? YES
71 viewers found this helpful.
|
| |
n/a
austin, tx
Mar 26, 2010
|
GREAT MOUNT
used one mount to attach GPS unit and another mount to attach satellite radio to my street glide hand grips where mirror mounts normally go. I didn't want u-bolts attached to the handlebars, product worked out great, I can simply remove my electronics and leave the mounts. No problems whatsoever.
Recommend? YES
101 viewers found this helpful.
|
| |
TeeMon
Rio Vista CA
Oct 29, 2009
|
MOUNT BASE 9MM HOLE
Actually, I have not yet used this product. I bought another piece that I wanted to try first and if that did not work well, then I would try this piece. But the first piece seems to be working o.k. for now
Recommend? YES
99 viewers found this helpful.
|
| |
tshooz
Moncton, NB
Aug 21, 2009
|
GOOD MOUNT FOR GPS
Cons: none
This part is great addition for wanting to place my gps above my gauges on my sportbike. Placing my gps on the handlebar was awkward to look at when on the highway. This part is placed on the bolt from the windshield.
Recommend? YES
112 viewers found this helpful.
|
| |
Marc P
Oakville, ON
May 25, 2009
|
GREAT MOTORCYCLE SET-UP
Pros: easy to install, steady, simple
Cons: none
I used this base with a short arm and the base plate for a Magellan Crossover GPS on my 94 Honda VFR 750 and it works great! Very nice for a motorcycle that has no room on the handlebars for traditional mounts. Was worried about vibrations but it's extremely steady. Service was fast too. Thanks!
Recommend? YES
117 viewers found this helpful.
|
| |
Favs
Davis, Ca
May 11, 2009
|
FITS GREAT
It fits nicely on the handlebar mount bolt on my Suzuki DR650
Recommend? YES
112 viewers found this helpful.
|
|
