| The GPS SuperStore.™ Since 1994. |
 |
USA & International |
 |
|
| You are currently shopping on our GPS City USA website, which ships to the USA and Internationally. To shop on our Canada website, which ships to Canada only, please click the green button above. Prices will be in CAD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
RAM Mount Quest Series Stainless Steel U-Bolt Mount Specifications |
Please find below additional technical documentation and/or specifications for this item. This documentation may take the form of mechanical drawings, installation manuals, instruction manuals, and a table of specifications. |
RAM-B-149-GA15U |
The RAM Marine Grade Aluminum Mount with Stainless Steel U-Bolt Rail Base consists of the 1'' dia. ball and socket system with RAM Plastic Cradle for the Garmin Quest.
BASE DESIGN:
 The RAM-B-231 RAM Mount Powder Coated Marine Grade Aluminum Rail Base has a 1.0 inch diameter Rubber Ball designed to sit at right angles to the mounting rail. The Stainless Steel U-Bolt and nuts included are designed it fit on most motorcycle round handlebars, or any circular rail or pipe with diameter from 3/4 to 1.0 inch.
To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black rubber covers over the exposed ends of the u-bolt.
NOTE: This base is completely rust proof.
For Larger Rail Mounting:
For a larger rail, you can purchase the RAM Mount Stainless Steel Large Rail U-Bolt for circular rails with diameter up to 1.25 inches.
ARM DESIGN:
The Powder Coated Marine Grade Aluminum Standard Length Double Socket Arm is 3.0'' long when measured between socket centers.
CRADLE DESIGN:
The RAM-HOL-GA15 RAM Mount High Strength Plastic Cradle is designed to hold the Garmin Quest Series, including the following GPS units,
- Garmin Quest
- Garmin Quest 2
- Harley Davidson Road Tech Conquest
- Harley Davidson Road Tech Quest
- Garmin Jeep Trail Guide
All cables can stay connected to the unit while in the RAM cradle.
Connecting the Garmin Power/Speaker Cable to the RAM Cradle:The RAM-HOL-GA15 Quest RAM Cradle Cradle will allow you to connect the Garmin Cigarette Lighter/Power Cable in a similar fashion to the Garmin Quest Cradle. The RAM Cradle DOES NOT include the TORX-T5 key for removing the cable from the Garmin cradle. (You can remove the screw from the Garmin cable with a small flat head screw driver) Once removed, you can connect the cable to the RAM Cradle and be able to charge the Quest with you cigarette lighter power and hear the autorouting voice prompting commands. |
|
|
|
|
