This item is not currently available. Please check back to see if it becomes available.
Accessories may still be available for this item. Click to view accessories.
The GPS City recommended alternative for this product is the .
RAM Mount RAP-B-104R-GA1 Product Detail
Category: RAM Mount RAM Mounts
Manufacturer: RAM Mount
Model No: RAP-B-104R-GA1U
SKU: RAPB104RGA1
Weight: 0.458 lbs
Need Assistance?
Contact us on from 8AM - 5PM PST, Mon-Fri
or
Call us at 1-866-GPS-CITY (1-866-477-2489) from 8AM - 5PM PST, Mon-Fri
What's Included With The RAM Mount RAP-B-104R-GA1? The RAM Mount RAP-B-104R-GA1 ships with the following items included:
RAM Mount RAP-B-104R-GA1 Description The RAM High Strength SHORT Plastic Rail Mount consists of the 1'' dia. ball and socket with button system and RAM Plastic Cradle for the Garmin GPS 38, 12, 12CX, 12XL and 12MAP.
BASE DESIGN: The High Strength Plastic Rail Base has a 1.0'' diameter Rubber Ball designed to sit at right angles to the mounting rail. The Rail 'U' Clamp will fit a circular rail with diameter from 1.0''.
For a larger rail, you can purchase the RAM-B-231LSS Large Rail Base for circular rails with diameter from 1/2'' to 1 3/8''.
To mount to a circular rail, simple press the plastic 'U' clamp around the rail and then connect and tighten the small nut and bolt to close the 'U' clamp.
NOTE: Placing a rubber lining (not included) between the tube and the mount for a tube with a diameter less than 1'' will help the base 'grab' the rail.
IMPORTANT NOTE FOR MOTORCYCLES USES: This base is not recommended for Motorcycles due to the heavy vibration. An alternative would be the RAM-B-231 and RAM-B-149 Stainless Steel U-Bolts.
ARM DESIGN: The High Strength Plastic SHORT Length Single Socket Arm is 1.75'' long when measured from socket center to button socket end.
CRADLE DESIGN:
The RAM-HOL-GA1 RAM Mount High Strength Plastic Cradle is designed to hold the Garmin GPS 12 Series, including the following GPS units,
Garmin GPS 12
Garmin GPS 12CX
Garmin GPS 12XL
Garmin GPS 12MAP
Garmin GPS 38
All cables can stay connected to the unit while in the RAM cradle.
