| The GPS SuperStore.™ Since 1994. |
 |
USA & International |
 |
|
| You are currently shopping on our GPS City USA website, which ships to the USA and Internationally. To shop on our Canada website, which ships to Canada only, please click the green button above. Prices will be in CAD$. |
 |
Please note: You may lose the contents of your shopping cart when you change websites. |
|
|
Sign In | Order Status | Help | Feedback
|
|
RAM Mount RoadMate Series Stainless Steel U-Bolt Mount Specifications |
Please find below additional technical documentation and/or specifications for this item. This documentation may take the form of mechanical drawings, installation manuals, instruction manuals, and a table of specifications. |
RAM-B-149-MA4U |
The RAM-B-149-MA4 RAM Mount Marine Grade Aluminum Mount with Stainless Steel U-Bolt Rail Base consists of the 1'' dia. ball and socket system with RAM Plate and Mounting Hardware to connect to the Magellan Roadmate Cradle. The cradle may be included with the purchase of your Roadmate, or you can purchase a second cradle if required.
Mount Cradle Design:
The RAM-B-202-MA4 Aluminum Rectangular Plate has a four hole pattern, and four screws, that will connect to the existing holes found on the back of the following cradles made by Magellan:
Note: The Magellan cradles listed may be included with the purchase of each GPS unit, or can purchased separately.
Connection Hardware Included:
The plate includes a set of four screws to connect the plate to the back of the Roadmate cradle.
Part Design Change:
This part originally shipped with a RAM Aluminum Diamond Plate (RAM-B-238) and two screws to connect diagonally with te Magellan Roadmate Cradles.
Mount Arm Design:
The RAM-B-201 Marine Grade Aluminum Dual Socket Arm has Dual B Size 1 inch Ball Sockets. The arm is 3 inches long between socket centers and is finished with a Black Powder Coating. The side of the arm includes a tightening knob which allows you to open and close the socket ends.
Mount Base Design:
 The RAM-B-231 RAM Mount Powder Coated Marine Grade Aluminum Rail Base has a 1.0 inch diameter Rubber Ball designed to sit at right angles to the mounting rail. The Stainless Steel U-Bolt and nuts included are designed it fit on most motorcycle round handlebars, or any circular rail or pipe with diameter from 3/4 to 1.0 inch.
To mount the rail base, place the top of the base on the rail and then slide the u-bolt around the rail, into the holes in the base top. Now tighten the screws onto the u-bolt until the base is clamped firmly. If you desire, you can now slot the black rubber covers over the exposed ends of the u-bolt.
NOTE: This base is completely rust proof.
For Larger Rail Mounting:
For a larger rail, you can purchase the RAM Mount Stainless Steel Large Rail U-Bolt for circular rails with diameter up to 1.25 inches. |
|
|
|
|
