RAM Mount Steel U-Bolt Cradle Plate Mount 1.0 inch Ball User Gallery
|
Customer submitted images and stories of the RAM Mount Steel U-Bolt Cradle Plate Mount 1.0 inch Ball. You can also view our entire gallery or add your own gallery item. Special limited time offer. Get a free t-shirt with every approved submission with pictures.
|
| RAM GPSMAP MOUNT ON KLR650 |
|
|
Thought I would post pictures of the RAM mount in action on my 2008 KLR650. Not in action I guess really, but sitting the garage.
Other than a lack of finish on the rubber coating on the mount balls, have been very happy with the mount (RAM-B-149-GA41U).
Functionally it's perfect, easy to install and position, doesn't move at all during use, including bumpy roads and highway driving.
The gps itself (GPSMAP 62) works great on the motorcycle. Have the base maps plus topo maps for Ontario and the city navigator package. Mostly just use the trip computer as speedometer, odometers, clock, etc., but there are lots of features and options that make it very helpful.
Also use on occasion for navigation to places I've never been before, and no problems there. Screen visibility overall is very good with backlight turned off, even in direct sunlight. Battery life has also been great, no intensive to install a 9v or usb receptacle on the bike.
Happy trails! |
POSTED BY: Andrew on May 1, 2012
CATEGORY: Motorcycle
VIEWS: 2488 |
| PLACES: Sudbury |
|
| IPOD TOUCH ON V-STAR CLASSIC |
Stereo on aluminum plate and Ram |
New Ram mount for the iPod Touch |
Neat and clean installation |
| | |
|
A couple of years ago I decided I needed to add stereo to my V-Star Classic. A friend gave me a Ram mount to make installation easy. It has been rock-solid for the two years I've had it.
Naturally, when I decided to add an iPod Touch I ordered the Ram Mount from GPSCity,com.
The entire system is out of the way, easily accessible and protected. |
POSTED BY: Greg Davis on April 30, 2012
CATEGORY: Motorcycle
VIEWS: 2278 |
| PLACES: Virginia |
|
| 2002 HONDA VFR800 CAMERA MOUNT |
|
|
Camera Plate ATV UTV Mount RAM-B-149Z-2-202A mounted on my 2002 Honda VFR800 V-Tec using a HERO HD video camera. My buddy and I rode the Shenandoah National Park in VA and to record our ride I used the ATV UTV Ram Mount on my front right fork. The install was quick, the operation of the mount worked flawlessly and the video turned out great. The HD camera never moved from its position on the mount, not even during highway speeds.
The mount itself doesn't have any installation instructions but it's obvious that the rubber sleeve fits over the metal strap and the metal strap adjuster fits neatly inside the hard plastic fitting. Although this mount worked well on my bike, I cannot account for its use on other bikes. As long as the mounting and camera do not imbed the operation of your bike, then it should work as well as it did for me. Enjoy! |
POSTED BY: John Backus on April 23, 2012
CATEGORY: Motorcycle
VIEWS: 5004 |
| PLACES: Shenendoah National Park |
| TAGS: ram mount, motorcycle mount, camera mount |
|
| GPSMAP62S ON HONDA XR650L 2011 |
Without GPS |
With the GPSMap 62s |
Driver's view |
brand new bike 71 km...:) |
Right side with GPSMap 62s | |
|
I've bought the Garmin GPSMap 62S last year. This year got a XR650L 2011 and wanted something hard and sturdy to fit it on.
So I selected the "RAM Mount Garmin GPSMAP 62 62s 62st Motorcycle Mount RAM-B-149Z-GA41U" as all guys on motorcycle forum recommended me. This Ram Mount can't be that easy to install. 2 screws ans that's it, installed.
Just ridden 200 km on roand and off road with it by now but I can say it's build tough, built to last for years.
Easy access to the GPS unit buttons. Easy as hell to remove and put it back on the Mount. I highly recommend this product. Cheap bottom price, high grade quality, tough, easy to adjust the angle.
|
POSTED BY: Yanick Joly on April 14, 2012
CATEGORY: Motorcycle
VIEWS: 5879 |
| PLACES: Quebec |
| TAGS: ram mount, motorcycle mount |
|
| E-TREX 20 ON ARCTIC CAT ATV |
E-Trex 20 / Ram Mount 1 | | | | | |
|
I've had my E-Trex 20 for a couple of months now and found it to be a very reliable devise. I purchased it with the Ram Mount system for the E-Trex 20 but found once I went to install it, that the Ram Mount would not fit the devise because there was no room for the power supply cable once it was plugged into the devise.
I improvised and turned the ram mount up-side-down, used a few hand tools to modify the mount and now it works perfectly fine. I will purchase a new ram mount once it becomes available for the E-Trex 20. |
POSTED BY: Derrick Dunne on March 8, 2012
CATEGORY: ATV
VIEWS: 5191 |
| PLACES: Grand Bank |
|
| MOUNTED ON 2000 YAMAHA V-STAR 1100 |
|
|
Here are a few images of how this mount looks on my 2000 Yamaha V-Star 1100. Works great, very sturdy.
If anyone has any ideas on where to pick up some sort of plastic self-closing clasp to hold the wires along the underside of the gas tank, I'd love to hear them. For now, I'm relying on the old standby, duct tape. Fortunately, you cannot really see it from the side unless you're looking up at it.
|
POSTED BY: tripp on February 24, 2012
CATEGORY: Motorcycle
VIEWS: 10677 |
| PLACES: my garage |
| TAGS: ram mount, motorcycle mount |
|
| RAM EXPLORIST GPS MOUNT |
Hardcore Geocaching! | | | | | |
|
I ride my XL600r in the back country of Colorado, most times not knowing where I'm going so I attach my Magellan eXplorist to my handlebars and track where I've been so I know how to get back out. I also use it to geocache mounted on my handlebars. I ride some pretty gnarly trails over rocks and through streams and this thing holds it on there like nothing else! I love all of my Ram Mounts!! |
POSTED BY: Todd Kitting on February 10, 2012
CATEGORY: Motorcycle
VIEWS: 2889 |
| PLACES: Evergreen |
|
| MONTANA 600 AND SHORT RAM MOUNT |
|
|
Being new to ATVing and back roads trail riding in New Brunswick I found myself concerned with how many turns I took and hoped that my memory could get me out of the woods.
Needless to say it wasn’t long before I started searching for an appropriate GPS unit. As usual my search started and finished with GPScity.ca. I pondered for a week using their vast knowledge, Q and A section where I decided on the Garmin Montana 600 with RAM Mount.
This unit and the Topo Canada maps allow me to track all adventures so that I can enjoy the outdoors riding at the same time finding my way back. I was able to personalize menus and shortcuts for quick access on the trails. The short RAM mount positions and safely secures the Montana right in the perfect spot for the driver. It has been a great addition to my new Can-Am Outlander!
This is my third GPS purchased with GPDCity.ca and I have never been let down.
|
POSTED BY: Sean Rooney on January 12, 2012
CATEGORY: ATV
VIEWS: 10410 |
| PLACES: Moncton |
| TAGS: ram mount |
|
| GARMIN DAKOTA 10 RAM ATV MOUNT |
Garmin Dakota 10 sitting snugly in its cradle |
|
|
|
| |
|
I recently purchased an ATV and took out my old Garmin eTrex Legend HCx GPS to map the trails around my home, the device was just loosely attached to the handlebars and the screen was damaged as a result. I then purchased a new Garmin Dakota 10 GPS and got the RAM mount from GPScity.ca which has worked out great, the mount installed in less than 5 minutes and its flexible enough to place the GPS where you need it and it can be easily tightened to where it'll stay in place and not move even on long bumpy rides. |
POSTED BY: Hugues Mackay on January 8, 2012
CATEGORY: ATV
VIEWS: 7856 |
| PLACES: Porters Lake |
| TAGS: ram mount |
|
| GARMIN MONTANA 650 |
|
|
One Gps do it all with Garmin Montana 650
I got few mounts and use it on my motorcycle for off road and My van for work |
POSTED BY: lior elbaz on December 26, 2011
CATEGORY: Motorcycle
VIEWS: 13725 |
| PLACES: California |
| TAGS: ram mount, motorcycle mount |
|
| RAM MOUNT LOWRANCE XOG GPS CRADLE |
|
|
I purchased a Lowrance XOG GPS because I like that I can create my own screens. I modified a speedometer screen that gives me great info and if I'm using the GPS to direct me to a destination the pop up turn display works wonderful.
I wanted this on my motorcycle. I found a RAM mount here at GPSCity. The price was right (very inexpensive) shipping was reasonable and very fast. I also purchased a motocycle RAM ball and extension.
I found the cradle and mounts to be very sturdy and really holds the GPS tight.
Here's a few pictured of the setup. |
POSTED BY: Domeinc on September 9, 2011
CATEGORY: Motorcycle
VIEWS: 14075 |
| TAGS: ram mount, motorcycle mount |
|
| GO PRO MOUNTING ON A V TWIN |
|
|
GPS units, phones, Ipods, etc. are all relativly easy to mount on a motorcycle with Ram Mount devices. Camera's create a new problem. Mounting AND vibration.
I needed to find a way to mount my GoPro HD video camera to both my Goldwing and my Roadstar and make it fairly simple to switch back and forth. It also had to be pretty solid and minimize vibration.
The Goldwing was pretty simple as I already had a couple of ball mounts on it and it rides smoothly. It worked on the flex finger mount fine, both thru the windshield and around it.
The Roadstar presented more of a challenge, both in places to mount it and vibration. I had tried using the mounts that came wtih the camera on the handlebars and the lower crash bars. Both had incredible vibration, so bad it was nauseating to watch. The vibration on the lower crash bars was bad enough to break the plastic mount and I lost the camera. GoPro was very cool about it and replaced it for me but I wasn't going to mount it again without coming up with something more solid and stable. Searchin thru GPS citys selection I came across the tripod mount. As GoPro had the female side I ordered that and called to order the male side. They led me to the same item in aluminum rather than plastic as well as the handlebar mount and the long arm. While I'm still somewhat leary of the plastic female side from GoPro (paying attention Ram Mount), I'm way happy with the video quality I'm now able to get in spite of the V twin vibration with the mount on the bars, extending beyond the fairing's windshield, and resting against the mirror mount. Just need to come up with a good teathering idea. I can't post video here so you can see how much better it is now so here's a few pics of the mounting of both the camera and my smart phone/GPS/music player. |
POSTED BY: Lynn Blakemore on September 7, 2011
CATEGORY: Motorcycle
VIEWS: 8712 |
| PLACES: San Diego |
|
| TOM TOM MOUNT |
|
|
My friend Mike told me about your mounts and I ordered one for my Electra Glide,needless to say I was VERY impressed with both the product design and the the way this thing is made.
It isn't easy finding a product at any price with the quality I found in your mounts. After installing this I couldn't help but order another for my Iphone. Kudos guys and look forward to dealing with you again. |
POSTED BY: Kevin Gantnier sr on May 29, 2011
CATEGORY: Motorcycle
VIEWS: 15877 |
| PLACES: Connecticut |
| TAGS: ram mount, motorcycle mount |
|
| RINO-LY IMPRESSED! |
|
|
I bought the Garmin Rino 530 HCx Canada & Ram Mount prior to spending a week training on ATVs in Minden. It rained all week and really tested the set up. The GPS never lost signal and the Ram Mount kept the unit secured on the handle bars of the bike. I can hardly wait for the Deer season!! |
POSTED BY: Trevor M on May 25, 2011
CATEGORY: ATV
VIEWS: 5218 |
| PLACES: Minden |
|
| GARMIN RAM MOUNTED ON CAN AM |
|
|
I decided to mount my GPS on the front rack, instead of cutting away some of the hand protector to get to the handlebar. Unit is close enough for good reading, yet not in line of sight. Works great! |
POSTED BY: Norm on April 20, 2011
CATEGORY: RAM Mounts
VIEWS: 18678 |
| PLACES: Alberta |
| TAGS: ram mount |
|
| SCOOTER TOURING WITH RAM MOUNT & NUVI 550 |
Pymatuning Lake |
PA/Ohio | | | | |
|
After searching for gas stations while touring along the Blue Ridge Parkway, calling for roadside assistance somewhere in Tennessee and not knowing exactly where I was at (Well, there's a cornfield on the left...a cornfield on the right, too. Does that help?), and having my meticulously compiled paper directions melt away in a thunderstorm four hours into a week-long tour, I figured I'd better get a GPS. I settled on a Garmin Nuvi 550.
After some research, I decided the RAM system turned out to be the best mounting solution. Solid, dependable, and clean looking. I've been using it for several years now without a single problem.
I just ordered up a mount for my motorcycle and will soon be ordering another one for my Spot II satellite messenger.
|
POSTED BY: S. Reeve on April 18, 2011
CATEGORY: Scooter
VIEWS: 18380 |
| PLACES: Pennsylvania |
| TAGS: ram mount, motorcycle mount |
|
| RAM MOUNT ON CAN-AM ATV |
Garmin Oregon 450 |
Garmin Oregon 450 |
Garmin Oregon 450 | | | |
|
Got the motorcycle RAM mount fitted on my Can-Am Outlander. Works great and is solid as a rock!
Also got an extra "Diamond Plate with 1 inch Ball RAM-B-238U" to my boat. Makes it very easy to move between vehicles. |
POSTED BY: Micael on April 3, 2011
CATEGORY: ATV
VIEWS: 9600 |
| PLACES: Sweden |
|
| REAL SUPPORT FOR SNOWMOBILE |
|
|
Saturday morning star from Kamouraska, Qc., Direction to Moose Valley, N.B., a loop at Edmundston, N.B. & return Kamouraska. For is first test 535 km in a day . This support have passed the test, love it!
Happy ride
Toolb |
POSTED BY: Dany Briand on March 12, 2011
CATEGORY: SkiDoo
VIEWS: 18033 |
| PLACES: Kamouraska |
| TAGS: ram mount |
|
| HONDA TRANSALP GPSMAP 62 INSTALLATION |
|
|
I ride a 1987 Honda Transalp - the Paris-Dacar replica machine - primarily on back roads and rougher gravel roads in eastern Ontario, thus the use of the GPSmap 62 in the photo (a recent birthday gift).
I've rubber mounted the RAM mount (RAM-B-149-GA41U) along with the Garmin Serial power and Data cable (010-11131-00) from GPS City, and an additional Stainless Steel 1.25 in u-bolt for the large diameter bars on the Transalp.
It's a very clean arrangement and I found that with the rubber mounting, the 1.25 in u-bolts were perfect for the job.
Thanks for the excellent service GPS City! |
POSTED BY: Shaun O'Reilly on February 19, 2011
CATEGORY: Motorcycle
VIEWS: 18172 |
| PLACES: Toronto |
| TAGS: ram mount, motorcycle mount |
|
| SPOTLIGHT AND LOWRANCE GPS MOUNT! |
|
|
These pictures have been sent in to GPS City by Ed, in South Dakota. He ordered these parts from us on January 13th and received them on January 15th and provided us with these photos.
Thanks Ed! Enjoy your RAM Mounts from GPS City/Expressmounts! |
POSTED BY: Jordan on February 1, 2011
CATEGORY: ATV
VIEWS: 14034 |
| PLACES: South Dakota |
|
| GARMIN GPSMAP 62S ON BMW R1200 GS |
First Stage |
With Full Kit |
With GPSMAP 62s in the Cradle |
Riding View | | |
|
Looking for a quality and reliable bracket for my Garmin GPSMAP 62s to use on my R1200 GS. Searched the web and I Found RAM Mount. But there were no photos and and any information to use specifically on GS.
So after I installed my RAM Mount "Garmin GPSMAP 62 Motorcycle Mount RAM-B-149-GA41U" I decided to share the photos with you out there. Cause I believe the placement of the GPS is superb. It doesn't interfere or block the instruments. You can change the angle of the ram mount depending on the angle of the wind shield. And no problems at all.
Very easy to install. Simple and very clever design. I'm very happy with the RAM Mount for GPSMAP 62.
Unlike some reviewers no problems reaching to the usb socket or "quit" and "enter" buttons on the blow.
Highly recommended. |
POSTED BY: Antar Turgay on January 15, 2011
CATEGORY: Motorcycle
VIEWS: 13353 |
| PLACES: Istanbul |
|
| GPS MOUNT FOR HARLEY DAVIDSON |
|
|
I bought the GPS mounts for my Harley and they worked great. They did not loosen with vibration. I was able to utilize my GPS from my car for motorcycle trips without spending $1000 plus for the official Harley GPS. |
POSTED BY: Mike Peco on October 26, 2010
CATEGORY: Motorcycle
VIEWS: 24505 |
| PLACES: Ohio |
| TAGS: ram mount, motorcycle mount |
|
| MY FIRST GARMIN ROAD TEST |
|
|
I ride a motorcyle & I visit some place in Canada & U.S. I do 20000km every season, I change my tomtom for a Garmin 1450LMT, really great GPS, easy & simple to use, I love its big screen, over all it's way point I can install my self, very great product. |
POSTED BY: Martin on October 22, 2010
CATEGORY: Motorcycle
VIEWS: 25792 |
| PLACES: Adirondack |
| TAGS: ram mount, motorcycle mount |
|
| ARCTIC MOTORCYCLE ADVENTURE |
Crossing the Arctic Circle on the way north. |
Note the latitude |
just north of Inuvik. |
The weather closed in a little for the trip back. |
Some parts of the road got pretty sloppy. | |
|
During the summer of 2008 I took a 14,000 mile motorcycle ride from Florida to Alaska, as well as the Yukon and Northwest Territories of Canada, and back. The trip lasted fifty-two days, but the memories will last a lifetime!
The photos were taken along the Dempster Highway, which is the only road to Inuvik, NWT, north of the Arctic Circle. The weather on the way up was wonderful; however, the weather before and during the return trip turned much of the "highway" into a motorcycle mudbath!
Note the latitude in the closeup of my Garmin StreetPilot 2610. That photo was taken north of Inuvik, at the northernmost point of the trip. I use a RAM Mount to attach the GPS to the bike, and the mount and GPS worked well throughout the trip, and they still do today. |
POSTED BY: Peter Migli on August 29, 2010
CATEGORY: Motorcycle
VIEWS: 23189 |
| PLACES: Northwest Territory |
| TAGS: ram mount, motorcycle mount |
|
| BIKE MOUNT FOR MY THUNDER CAT |
Ready to explore |
| | | | |
|
ATVing is great fun, but in Northern Ontario the old trails criss cross all over and start to look similar after a while. A GPS is a must in this part of the country, but driving a Thunder Cat ATV is a 2 handed task!
I needed a reliable and easy to install mount for my GPS. This mount holds steady in all sorts of terrain and keeps my GPS safe and in plain sight. |
POSTED BY: Gary on August 14, 2010
CATEGORY: RAM Mounts
VIEWS: 15826 |
| PLACES: Ontario |
| TAGS: ram mount |
|
| TRIP TO VIRGINIA |
Travelling the highway in Virgina |
Travelling the highway in Virgina |
The entrance to Sky Line |
Travelling on the Sky Line |
At one of the observation turn offs | |
|
I purchased a Motorcycle mount for my Garmin 765T and it worked better than I had hoped for. One of the features in the Garmin is to track the trip and download it into Map Source. This was the first trip with a group from work. I had no idea where we were going so to take the roads again would have been a stretch. With the GPS on the handle bar playing music through the radio and tracking the whole trip was a great experience.
The mount was absolutely the best, The mount was stable and adjustable as I had to make minor adjustments for comfort. Again thanks to the staff for your help and I have attached a couple of pics of our trip.
Kevin, St Thomas, Ontario |
POSTED BY: Kevin Broughton on July 15, 2010
CATEGORY: Motorcycle
VIEWS: 24236 |
| PLACES: Virginia |
| TAGS: ram mount, motorcycle mount |
|
| AWESOME MOUNTS!!!! |
|
|
I searched around forever to find a mount for my GPS that I could use on both my bicycles, and my motorcycle. I enjoy riding long distances on both, and have been lost many times. But now that I have a new 11 month old daughter to tow behind me it is more important than ever to know where I am going!
I purchased the Ram Bicycle kit for mu NUVI 500 to attach to my commuter bicycle, and 2 more ball mounts. One for my Trek road race bike, and one for my 2000 Harley Davidson. I love this product on all three! Thanks Ram, and GPS city! |
POSTED BY: James Herr on June 16, 2010
CATEGORY: Bicycle
VIEWS: 9856 |
| PLACES: Auburn |
|
| RAM MOUNT ON ROAD KING |
|
|
Here are photos of my Garmin GRS 276c mounted on my 2005 Road King with the RAM mounting system. Been riding over 2 years with it and works like a charm. Great system. |
POSTED BY: John Taylor on May 11, 2010
CATEGORY: RAM Mounts
VIEWS: 19374 |
| PLACES: Sacramento |
| TAGS: ram mount, motorcycle mount |
|
| RAM FOR BICYCLE |
|
|
These Ram mounts work great. The Easy Roller can't be beat. These are for the Garmin Oregon and Magellan Triton 1500. I hooked a Garmin power lead into a water bottle with C cell nicad rechargeable batteries. Power lasts forever. Thanks for the mounts and power cable GPS City. |
POSTED BY: David on March 16, 2010
CATEGORY: Bicycle
VIEWS: 15293 |
| PLACES: Florida |
| TAGS: ram mount |
|
| RAM BICYCLE MOUNT FOR GARMIN 76CSX |
Oblique view |
Front view |
Side view |
Back view | | |
|
I have been using a homemade GPS mount on my Giant Seek 2 bicycle. It took up too much room on the butterfly/trekking bars. I needed room for my headlight.
I'm planning a long bicycle tour this summer. My Garmin 76CSx hand held GPS with "City Navigator North America NT" software should help me keep from getting too lost. It will also help me track my speed and mileage.
The RAM mount from GPS City holds my Garmin unit securely and is easy to dismount when I am not using it or when I am away from the bike.
It is incredibly easy to adjust the GPS to just the right position and the rubber elements in the mount will protect it from the pounding transited through a solid frame. There are not shocks on my touring bike. |
POSTED BY: Ken Manning on March 2, 2010
CATEGORY: Bicycle
VIEWS: 19852 |
| PLACES: Courtenay |
| TAGS: ram mount |
|
| 2008 YAMAHA FZ1 W/GPS AND RADAR DETECTOR |
2008 Yamaha FZ1 | | | | | |
|
This is the RAM mount setup on my new 2008 Yamaha FZ1. I was racking my brain trying to figure out where to mount everything due to the lack of fairing but RAM Mounts came to the rescue. I used 2x 1in. Steel U-Bolts on either side of the handlebar mount, a long arm and the cradle for my GPSMap 60Cx. The radar mount consists of a short arm and an Extension Cradle Plate with Ball. It works perfectly ! Thanks again GPSCity.com. |
POSTED BY: Allie Daneman on January 27, 2010
CATEGORY: RAM Mounts
VIEWS: 32767 |
| PLACES: Seattle Suburb |
| TAGS: ram mount, motorcycle mount |
|
| CONTINENTAL DIVIDE OFF-ROAD MOTORCYCLES |
On the trail looking for Mexico outside Banff |
Alberta |
Montana - Aglosized Spanish for mountain |
In the forests and reception is fine! |
Grand Tetons | |
|
We left Calgary toward Banff in late September hoping to beat the mountain snow. Mexico was our destination...off road.
We had a Garmin GPS 60CSx to follow a track assembled from trips previously taken by other riders, a SPOT Satellite Messenger for friends to follow our progress on the web and in the case of an emergency and needed major assistance and an Olympus 770SW camera to stand up to the weather and pounding to record our trip - all mounted to the handlebars via RAM mounts. Very slick!
The GPS 60CSx was wired into the bike's electrics and we changed the SPOT batteries only once as a preventative measure in the 19 days of the trip.
Over 90% of the trip was off pavement and most of the trip was on two-track trail. We covered 5,800 km from Calgary, Alberta to the Mexican border in New Mexico, crossing the Continental Divide 27 times.
Each day was a ride up and over mountains, across valley floors, crossing pristine streams and passing through the occasional small town all in the most amazing and varied landscape North America has to offer. Truly one of my favourite trips ever! I can not recommend it enough. We will do it again.
LC |
POSTED BY: LC on January 26, 2010
CATEGORY: Motorcycle
VIEWS: 32767 |
| PLACES: Canada to Mexico |
| TAGS: ram mount, motorcycle mount |
|
| RAM GPS AND CAMERA MOUNT |
|
|
Ram Mount is great product and affordable for your needs. |
POSTED BY: lior elbaz on January 19, 2010
CATEGORY: Motorcycle
VIEWS: 32767 |
| PLACES: California |
| TAGS: ram mount, motorcycle mount |
|
| MOTORCYCLE MOUNT - STEREO, PDA, HARD DRIVE |
Showing the MP3 player |
Showing the GPS | | | | |
|
I designed and built a stereo system for my Vulcan 800 Classic. I needed a good solid mounting system and RAM mount did it nicely. I have been using these mounts for 3+ years now. I just replaced the original mounts that had short plastic clamps with aluminum. I have use the sustem for both music and GPS. I am really glad I found this site as I would still be looking for a good mount or doing without. |
POSTED BY: Warren on January 17, 2010
CATEGORY: RAM Mounts
VIEWS: 21312 |
| PLACES: North Carolina |
| TAGS: ram mount, motorcycle mount |
|
| MOTORCYCLE RAM GPS 60 |
|
|
Riding in the Mohave Desert in California on a dirt bike. Big open space. You need to have a GPS mounted on your bike going on the Mohave Trail from Barstow to Las Vegas. Great ride! |
POSTED BY: lior on November 16, 2009
CATEGORY: OffRoading
VIEWS: 10287 |
| PLACES: desert |
|
| MOTORCYCLE MOUNT ON A BICYCLE |
Mounted to the handle bar stem |
A different angle | | | | |
|
I wanted the ability to move my Garmin Nuvi between my car and bicycle. I purchased the RAM Motorcycle mount that uses the Stainless Steel U-Bolt. I found the Garmin Nuvi was very solid in this mounting and the vibration that I was expecting to experience was minimal. The system worked like a charm. |
POSTED BY: Dale Coffing on September 28, 2009
CATEGORY: Bicycle
VIEWS: 6828 |
| PLACES: Albuquerque |
| TAGS: bike mount |
|
| SUZUKI LTZ-250 RAM MOUNT |
View From behind |
Side View |
Close up view of Mount | | | |
|
Here is the Ram Explorist GPS mount (RAM-B-149Z-MA5U) with the Ram mirror stud mount (RAM-B-349U)on a 2004 Suzuki LTZ-250. This ATV is primarily ridden on Trails. The RAM mount allows easy view and access to the Magellan eXplorist 200 GPS when I am trail riding. It is very solid mount. The entire mount is also easily removable when riding in areas where GPS is not desired. |
POSTED BY: Randy W. on September 22, 2009
CATEGORY: ATV
VIEWS: 14135 |
| PLACES: Pennsylvania |
| TAGS: ram mount, suzuki |
|
| HONDA AEROSHADOW & GARMIN GPSMAP 76 |
Customized RAM setup. |
Custom setup pic 2 | | | | |
|
Hello fellow RAM users.
I finally re-did my RAM motorcyle mount setup. I have an '05 Honda VT750 Aero Shadow. I would like to thank the guys at GPS City for giving me assistance with this setup since there is no pre-made part that i needed. It starts with a 1" u-bolt w/1" ball (all the parts are marine grade). To that is attached is attached the 3 1/2" arm. To that is attached my Garmin Map 76 and my ipod touch via a short 2 1/2" arm off to the left side.
The 3 1/2" arm is what has been customized. In order to get a proper ball on the left side, I removed the existing bolt and replace it with a correctly cut piece of ss 1/4" threaded rod. I then replace the existing tightening knob and washers on the right side. I have plenty of rod left over to other customized set-ups when i need to. I think it works and looks pretty good. |
POSTED BY: Nick W. on September 19, 2009
CATEGORY: Motorcycle
VIEWS: 26788 |
| PLACES: Ladysmith |
| TAGS: ram mount, motorcycle mount, honda, aeroshadow |
|
| RAM NUVI 500 SS U-BOLT MOUNT |
Original Mount |
With both | | | | |
|
I got this Ram mount and Cradle for my new Nuvi 550 GPS to use on my bike. I am glad it also came with the U-Bolt for the handle bars. The 1st picture is the mount on my orignal mount ball.
As you can see in the picture I already have a Ram Mount ball on the bike, but that is for my Video Camera to take movies of trips. |
POSTED BY: Scott Hazleton on September 2, 2009
CATEGORY: Motorcycle
VIEWS: 32767 |
| PLACES: Cape Cod |
| TAGS: ram mount, motorcycle mount, camera |
|
| TRACKING MY RIDES |
|
|
I love my Ram mount for my Magellan Explorist. I have a hobby of mapping places to ride dirtbikes in Idaho. In the last couple years I have mapped over 30 dirtbike trails with pictures and commentary. I also use it on my street bike to document some of the best riding in the USA. I have also mapped and documented 7 rides through some of the most beautiful and twisty roads in Idaho and Wyoming.
Rod |
POSTED BY: Rod Enos on July 26, 2009
CATEGORY: Motorcycle
VIEWS: 28607 |
| PLACES: Idaho |
| TAGS: ram mount, motorcycle mount |
|
| BACK ROADS ON A SUNDAY |
Garmin Nuvi 550 c/w RAM Mount |
Lost ? No Way!! Nuvi 550 Gets Me Home. |
400KM Sunday Ride | | | |
|
Took a 400+km run today from Kitchener up to Stayner and return. Ran some fantastic "No Winter Maint" roads in the Creemore/Hockley Valley area. Going Home? Easy with the Garmin 550 Nuvi with the RAM mount on the handlebars.
Only dropped the bike once on a wild muddy hill....drop off, with a hard left turn at the bottom. Hence the missing hand guard. Rider only mildly bruised. |
POSTED BY: Wayne Wilkie on July 12, 2009
CATEGORY: Motorcycle
VIEWS: 32767 |
| PLACES: Southern Ontario |
| TAGS: ram mount, motorcycle mount |
|
| GPS RAM MOUNT FOR SPORT BIKE TOURING |
|
|
I needed a simple and inexpensive solution to mounting my GARMIN Nuvi 260W on my Yamaha FZ6 fordoing some tour riding. I was fortunate enough to find gpscity.ca as their selection, prices and shipping were perfect for my needs and I didn't get killed with cross border shipping charges!
I selected a simple handlebar mount RAM system along with the "Ezy-Mount Quick Release Adapter System" for easy on/off of the GPS unit.
This is the perfect addition to my motorcycle for upcoming touring. Thanks gpscity.ca! |
POSTED BY: Dave B. on May 6, 2009
CATEGORY: Motorcycle
VIEWS: 29068 |
| PLACES: Victoria |
| TAGS: motorcycle mount, ram mount |
|
| STURGIS HARLEY TRIP WITH GPS RAM MOUNT |
handlebar mount for my Garmin GPSMAP60CS |
Another view of the mount while rolling down the road |
Yellowstone Beauty | | | |
|
I took the trip of a lifetime in August of 2008, riding from the SF Bay Area of California to Sturgis South Dakota for the Sturgis Bike week celebration. Out of 5 riders in our group, I was the only one who had a GPS. I had used it before while riding, but had just recently decided to buy an actual mounting system so I could use it while riding. I ended up buying a RAM MOUNT system from GPSCITY.COM and by the end of day one I was already thinking this was the best money I had spent in preparation for the trip. I was able to set each destination for the day into the GPS and very single time we got into a situation where we weren't exactly sure which way to go I had 4 people pointing at me and telling me to get to the front of the pack and lead us out of confusion...haha. I pretty much lead the pack around for most of the trip, and you know what they say; "the view never changes unless you're the lead dog!!" Great product!! |
POSTED BY: Brian Mathews on May 1, 2009
CATEGORY: RAM Mounts
VIEWS: 32767 |
| PLACES: Sturgis |
| TAGS: motorcycle mount, ram mount |
|
| RAM MOUNT FOR GARMIN NUVI 350 GPS |
|
|
Here is a picture of the Ram Mount on my Ninja 250R. |
POSTED BY: Tommy on April 20, 2009
CATEGORY: RAM Mounts
VIEWS: 23460 |
| PLACES: Vancouver |
| TAGS: motorcycle mount, ram mount |
|
| MOUNTED TOMTOM ON MY HONDA SABRE |
GREAT MOUNT!! | | | | | |
|
I was worried about vibration, but this mount holds my GO720 rock solid. |
POSTED BY: PRESTON on March 8, 2009
CATEGORY: Motorcycle
VIEWS: 32767 |
| TAGS: motorcycle mount, ram mount |
|
| RAM GPS MOUNTS GO ANYWHERE |
|
|
My Ram GPS mount holds my Lowrance H2O gps on every thing. It gets transferred from ATV to Motorcycle to Boat to Truck, it takes me to the Duck hunting spots in the dark hours of the morning and helps me find my way on back country rides through the woods. Ram Mounts are not a flimsy floppy thing, they are very sturdy and rock steady, they have to be for me. |
POSTED BY: Chris on January 12, 2009
CATEGORY: Backcountry
VIEWS: 27010 |
| PLACES: Tallahassee |
| TAGS: atv mount, ram mount |
|
| CRUZEN WITH MY GPS |
|
|
Ian at GPS City Canada (gpscity.ca) who has always given me great service told me that if I submitted a story, I had better take a picture of my motorcycle with its RAM mounted iWay 500C in an interesting place...!! Problem is, I never have a camera with me when I go out for a scoot. You'll have to settle for a picture taken by a 9 year old kid who was riding behind his dad during our excursion to beautiful Harrison Hot Springs, British Columbia. Beleive it or not, this is the best picture we got from that trip that clearly shows the GPS mounted to my windshield and handlebars.
I have two GPS Units, the iWAY 500c by Lowrance, and a Garmin Nuvi 250. I use interchangable RAM mountig hardware for the various applications I have for these units. I have purchased all of my GPS gear and accessories from GPS City and am thoroughly impressed with their service. I order my goods online and stop by their Calgary shipping depot to pick up my purchases in person... thanks Ian!
Although I have used the Garmin Nuvi with it's new RAM bracket on my Honda Shadow Aero motorcycle, I prefer the iWay on my bike. The screen on the iWay can be set much brighter than the Garmin Nuvi and is much bigger - these attributes are also very handy on the handlebars in the bright sunshine. I have hard-wired the iWAY into the electrical system with the accessory chord it came with - would love to find another one of these hardwire chord connections but Lowrance has discontinued the iWAY 500c model. I don't have to worry about an internal battery fading since the iWay is hooked up directly to my motorcycle battery and alternator. I have also installed a 25watt amplifier and small speakers on my bike so I can take advantage of the iWay's 10GIg of MP3 music storage!!
Unfortunately the picture includes me and a residental street in Chilliwack BC. NExt one I'll make sure we have a nice background!! |
POSTED BY: Geoff Squires on August 21, 2008
CATEGORY: Motorcycle
VIEWS: 24151 |
| PLACES: Chilliwack |
| TAGS: motorcycle mount, ram mount |
|
| MY LEGEND MOUNTED ON MY MOTORCYCLE |
Mounted on the Bike |
After the tip-over | | | | |
|
I love my GPS receiver, and I knew it would be just a matter of time before I mounted it on the bike.
When I had a minor accident and broke the trip meter reset knob on my speedometer (which acts as a gas gauge), I knew it was time to install the GPSr.
Since installing it, I have really come to respect the technology that goes into these things, as it never failed me - until another "incident" in a parking lot, that all but ruined it. Amazing though, even after being smashed, there was enough of the LCD screen unaffected that would still display my speed and my mileage.
I could even reset the odometer if I could guess what my inputs were doing! lol!
It has since been replaced with another Legend.
Also, the speedometers that came with BMW's in the 70's were not known for their accuracy, so it is real nice to have an accurate speedometer. |
POSTED BY: Rob Valdez on July 18, 2008
CATEGORY: Motorcycle
VIEWS: 28766 |
| PLACES: Indianapolis |
| TAGS: motorcycle mount, ram mount |
|
| GARMIN GPSMAP60CSX ON NEW YAMAHA KODIAK 350ATV |
|
|
I am delighted with the performance of the Big Screen Magnifier. Here are some picture of the unit, in place overtop a Garmin GPS 60Csx, which is handlebar-mounted on my Yamaha Kodiak 350. |
POSTED BY: Bruce on February 19, 2008
CATEGORY: Motorcycle
VIEWS: 32767 |
| TAGS: yamaha, screen magnifier, motorcycle mount, ram mo |
|
| ROCK SOLID ATV RAM MOUNT |
|
|
RAM mount with stainless u-bolt for Lowrance ifinder H2O C on a 2007 Suzuki Vinson500 4x4. Rock solid mount given the rugged terrain this bike travels over in Newfoundland. |
POSTED BY: Greg B. on September 4, 2007
CATEGORY: ATV
VIEWS: 15335 |
| PLACES: newfoundland |
| TAGS: suzuki, atv mount, ram mount |
|
| CB RADIO WITH RAM MOTORCYCLE MOUNT |
|
|
I needed a low cost Citizen Band (CB) radio setup to communicate with members of my riding group. The radio is a Midland portable/mobile CB radio, model 75-822. I used a Ram Mount Universal Belt Clip on a stainless steel U-bolt aluminum mount (P/N: RAP-B-149-BC1U). A RAM Mount Ezy-Mount Release adapter system is attached for convenience (RAP-326). I will being using a Motocomm headset (MC-551) and a Firestick 40 Channel No Ground Plane 4' Antenna (FSLG4-M2). The CB radio comes with a large belt clip on the back of it. |
POSTED BY: Alan on July 6, 2007
CATEGORY: Motorcycle
VIEWS: 25903 |
| TAGS: cb radio, motorcycle mount, ram mount |
|
| ETREX COLOR ON WITH RAM SCOOTER MOUNT |
|
|
I bought the RAM Mount from GPS City and am very happy with my purchase.
The GPS unit is a Garmin eTrex Legend C. The mount is the Ram Mount Aluminum eTrex Color Series Stainless Steel U-Bolt Mount, with Plastic U-Bolt Adaptor for Handlebars. These are mounted to the mirror stem of my 2005 Aprilia Scarabeo Touring Maxi-Scooter.
Excellent product. |
POSTED BY: Joseph on April 23, 2007
CATEGORY: Scooter
VIEWS: 12805 |
| TAGS: ubolt, scooter mount, ram mount |
|
| GARMIN QUEST WITH TOPO CANADA AND RAM MOTORCYCLE MOUNT |
|
|
This was the last ride on my bike before winter last year. I have ram mounted a garmin quest and use the topo canada map set to explore trails and roads around my area. |
POSTED BY: Dave on March 20, 2007
CATEGORY: Motorcycle
VIEWS: 15479 |
| TAGS: motorcycle mount |
|
| RAM UBOLT MOUNT WITH GARMIN GPSMAP 60CSX ON ATV |
|
|
Here is how I used a RAM Mount with my GPSMAP 60csx on a VTT Outlander and my partner is very crazy about it. |
POSTED BY: Vital on November 11, 2006
CATEGORY: ATV
VIEWS: 26590 |
| TAGS: ubolt, atv mount, ram mount |
|
| RAM UBOLT MOUNT WITH GARMIN GPSMAP 76CS ON HONDA RANCHER FA 400CC ATV |
|
|
I'm using a Garmin GPSMAP76CS (discontinued and replaced by GPSMAP76CSx) on a 2006 Honda Rancher FA 400cc 4x4 ATV mounted by a RAM Mount RAM-B 149-GA14U.
I have bounced this ATV all around and the GPS always stays securely in place and gets me where I want to go. |
POSTED BY: Steve on October 18, 2006
CATEGORY: ATV
VIEWS: 21733 |
| TAGS: ubolt, honda, atv mount, ram mount |
|
| RAM UBOLT MOUNT FOR GARMIN QUEST 2 ON A 2004 KAWASAKI 1500CC NOMAD |
|
|
On the right handlebar is my Garmin Quest 2 purchased from you, mounted with a 3" RAM arm and 1 inch handlebar mount, for the powered Garmin unit. On the left is my J&M 2003 CB/weather radio/accessory audio player unit (also mounted with a 1.75 inch arm and handlebar mount), with an "audio in" feed from my GPS motorcycle mount, so while I am travelling, listening to my MP3 /FM tuner or talking on the radio, I can still hear my GPS warning me of upcoming turns. |
POSTED BY: Robert on September 4, 2006
CATEGORY: Motorcycle
VIEWS: 24708 |
| TAGS: ubolt, kawasaki, motorcycle mount, ram mount |
|
| RAM UBOLT MOUNT FOR GARMIN RINO 530 ON A HONDA 2005 CRF 450X |
|
|
I am sending pictures of my Garmin Rino 530 mounted on my Honda 2005 CRF 450X handlebars. The mounting system is comprised of a Ram Garmin Rino 530 cradle, 1.75" short arm with double socket 1" dia, 1" ball with diamond plate and stainless steel 0.75" to 1" round rail u-bolt base with 1" ball aluminum plate. This setup works great and is tucked down close to the handlebar crossbar making the assembly very low profile and out of the way although very viewable while riding and adjustable. |
POSTED BY: Stuart on August 27, 2006
CATEGORY: Motorcycle
VIEWS: 26081 |
| TAGS: honda, ubolt, motorcycle mount, ram mount |
|
| RAM UBOLT MOUNT WITH GARMIN GPS V ON DIRT BIKE |
|
|
I love this Product! Great! As you can see, i abuse the elements :) and the Mount just keeps on working! A+
Thanks Guys! |
POSTED BY: Greg on July 9, 2006
CATEGORY: Motorcycle
VIEWS: 24973 |
| TAGS: dirt bike, ubolt, motorcycle mount, ram mount |
|
| RAM UBOLT FOR LOWRANCE IFINDER H2O C ON 2005 SEADOO GTX |
|
|
Here are 3 pictures of a RAM Mount system used on a 2005 Sea-Doo GTX Supercharged. I use it to hold my Lowrance iFinder H20c GPS.
The item used is the RAM-B-149-L03.
1. iFinder H20c Cradle - RAM-HOL-L03
2. Stainless Steel U-Bolt with Aluminum Standard Arm (3") with Diamond Plate Assembly - RAM-B-149 |
POSTED BY: Bob on July 4, 2006
CATEGORY: SeaDoo
VIEWS: 12544 |
| TAGS: seadoo mount, ram mount |
|
| RAM UBOLT MOUNT FOR GARMIN QUEST ON HARLEY DAVIDSON ULTRA CLASSIC |
|
|
Just Purchase your Ram Mount for Quest Gps I have it on 2004 Harley Davidson Ultra Classic.
Your Stuff works Great. |
POSTED BY: Jim on June 25, 2006
CATEGORY: Motorcycle
VIEWS: 24537 |
| TAGS: harley, ubolt, motorcycle mount, ram mount |
|
| RAM UBOLT MOUNT WITH GARMIN STREETPILOT C330 |
|
|
Garmin streetpilot c330 on Harley-Davidson |
POSTED BY: Ricci on May 25, 2006
CATEGORY: Motorcycle
VIEWS: 24402 |
| TAGS: ubolt, harley, motorcycle mount, ram mount |
|
| RAM UBOLT MOUNT WITH GARMIN ETREX LEGEND |
|
|
I had to email you photos of the mount I bought from you. It works great. It takes motocycle riding to a new level! I can now ride anywhere I want and always know how to get back with out opening up a map. I love it!
Thanks GPSCity |
POSTED BY: Joe on May 21, 2006
CATEGORY: Motorcycle
VIEWS: 24497 |
| TAGS: ubolt, motorcycle mount, ram mount |
|
| RAM RAIL MOUNT FOR GARMIN STREETPILOT 2730 WITH XM ANTENNA MOUNT |
|
|
Here is the page with the first pics I took of the mounting. I have since moved it to the left handle bar so it doesn't block the center warning lights. I also painted the Garmin antenna mount with a special paint Rust-O-Ileum makes for plastics, it matches the Ram parts exactly. I will send you some updated photos once I get it tweaked.
Thanks for all of your help. The 2730 is awesome. |
POSTED BY: Steve on April 30, 2006
CATEGORY: Motorcycle
VIEWS: 24266 |
| TAGS: rail mount, xm, motorcycle mount, ram mount |
|
| RAM UBOLT MOUNT FOR STREETPILOT 2720 ON BMW K100 |
|
|
Take a look at the link of photos from my trip to the Red Desert, WY just outside of Wamsutter, WY. This was a test drive for my 2500 mile trip on another BMW K100 in Europe later that summer.
|
POSTED BY: Glen on April 17, 2006
CATEGORY: Motorcycle
VIEWS: 25921 |
| PLACES: red desert |
| TAGS: ubolt, bmw, motorcycle mount, ram mount |
|
| RAM MOUNT FOR STREETPILOT 2720 ON A MOTORBIKE |
|
|
I like to thank you all for your very professional work that you doing. I was very pleased with the sales representatives and technical support technicians who helped me to decide what type of equipment I needed.
I had received both parcels in perfect order, and first couple of days of testing in the car and on my motorcycle surpassed all my expectations. The unit is truly impressive gadget, I love it all ready.
I am an electro technician and I like electronics. This one is the most impressive piece that I own. Keep up the good work. |
POSTED BY: Jan on April 5, 2006
CATEGORY: Motorcycle
VIEWS: 19038 |
| TAGS: motorcycle mount |
|
| RAM UBOLT MOUNT FOR GARMIN STREETPILOT C330 ON HARLEY HERITAGE |
|
|
The following pictures show the componets mounted on my 05 Heritage Harley-davidson for my Garmin c330:
Ram-HOL-GA19U Ram mount streetpilot c330 holder
Ram-B-201U Ram mount Aluminum 3" standard arm with double 1" dia socket
Ram-B-231U Ram mount stainless steal 0.75" to 1" round rail u-bolt base with 1" ball aluminum plate. |
POSTED BY: Ricci on April 2, 2006
CATEGORY: Motorcycle
VIEWS: 24749 |
| TAGS: ubolt, harley, motorcycle mount, ram mount |
|
| RAM CLUTCH MOUNT FOR MAGELLAN MERIDIAN GOLD ON FJR1300 MOTORCYCLE |
|
|
I have been a satisfied RAM Mount user for over a year now. I installed my first RAM Mount system to house my Magellan Meridian Gold on my Yamaha FJR1300 prior to attempting my first Iron Butt Saddle Sore 1000 to Atlanta, GA from my home in Maine. You can see the installation here: <a href="http://www.robertmichaud.com/html/gps_mount.htm" class="difFont" target=_blank>http://www.robertmichaud.com/html/gps_mount.html </a>. I appreciate how solid the mount is and how simple and reliable the product is. Now I am going to add to it by replacing the single clutch lever bracket with a double one so that I can add a holder for my new Pioneer AirWave XM radio.
FYI - the Iron Butt (<a href="http://www.ironbutt.com" class="difFont" target=_blank>www.ironbutt.com</a>) was a success! Here's to many more enjoyable miles in the saddle!
|
POSTED BY: Bob on March 21, 2006
CATEGORY: Motorcycle
VIEWS: 24704 |
| PLACES: atlanta |
| TAGS: clutch mount, yamaha, motorcycle mount, ram mount |
|
| RAM UBOLT MOUNT FOR GARMIN ETREX ON GRIZZLY 600 4X4 ATV |
|
|
I mounted my Garmin Etrex on a 600 Grizzly 4by4 ATV. I used aluminum mount with stainless steel u bolt and etrex cradle (RAM-B-149-GA5U). It was very easy to install and with the double sockets it could be installed in just about any position on handle bars. I then went for a drive over rugged terrain and found the mount to be very stable. THANKS |
POSTED BY: Ian on February 8, 2006
CATEGORY: ATV
VIEWS: 15992 |
| TAGS: ubolt, atv mount, ram mount |
|
| RAM UBOLT MOUNT FOR IWAY 500 AND XM RADIO ON GOLDWING MOTORCYCLE |
|
|
This is my Lowrance iWay 500C, mounted using the dual ball RAM Mount, along with my Delphi SkyFi XM Radio. Mounted on my 2002 GL1800 Pearl Yellow GoldWing. I use this for long distance touring and it has been a life-saver when I was hungry, tired, or needed some gas and I was in unfamiliar territory. |
POSTED BY: GL1800wingwe on January 22, 2006
CATEGORY: Motorcycle
VIEWS: 26179 |
| TAGS: ubolt, xm, honda, motorcycle mount, ram mount |
|
| RAM UBOLT MOUNT FOR GARMIN ETREX LEGEND ON KAWASAKI BF750 MOTORCYCLE |
|
|
Here is a picture of my Garmin eTrex Legend mounted on my Kawasaki BF 750. It is mounted using the Garmin eTrex Handlebar Bike Mount. As noted in the picture I have my cell mounted as well.
This picture was taken on a fishing trip with my brother and granddaughter, this past summer. My brother has the same GPS and mount on his Yamaha Grizzly.
I save all tracks and over lay the topo maps of the various areas that we travel and also mark all waypoints of interest for possible return visits or for information for others.
This picture was taken at a location on a river in Nova Scotia called Peter Stillwater.
The eTrex is my second GPS, I used a Garmin 12 prior to the purchase of the eTrex. I have the topo maps of NS loaded in the eTrex and have found them very useful for exploring. |
POSTED BY: Bill on December 29, 2005
CATEGORY: Motorcycle
VIEWS: 25803 |
| PLACES: nova scotia |
| TAGS: ubolt, kawasaki, motorcycle mount, ram mount |
|
| RAM MOUNT FOR GARMIN QUEST ON BMW F650 MOTORCYCLE |
|
|
Hello GPS City! Garmin Quest using a RAM Mount on a BMW F650 during a motorcycle tour of Ireland -- we're on a car ferry crossing the River Shannon: |
POSTED BY: Rick on December 23, 2005
CATEGORY: Motorcycle
VIEWS: 24562 |
| PLACES: ireland |
| TAGS: bmw, ferry, motorcycle mount, ram mount |
|
| RAM RAIL STRAP MOUNT ON 2005 TRIUMPH DAYTONA 955I |
|
|
I have actually had my setup for a few months now and can honestly say that it is very sturdy and ideally mounted for visual use and for access to the buttons"..."After mounting the kit & cradle, I cut the end off the power cord and hardwired it to the battery. |
POSTED BY: Greg on October 27, 2005
CATEGORY: Motorcycle
VIEWS: 32767 |
| TAGS: rail mount, triumph, motorcycle mount, ram mount |
|
| RAM UBOLT MOUNT WITH GARMIN GPS V ON A 1997 HONDA XR600RV MOTORCYCLE |
|
|
Hi, this is my setup. I am using a Garmin GPS V deluxe and RAM mount model #RAM-B-149-GA2U on my 1997 Honda XR600RV. I have been using it for 2-3 yrs now and it has been a flawless setup. The gps is connected via a custom waterproof 12v power outlet I mounted behind headlight and custom battery installation. My previous unit was a GPS III Plus using same mount. My next unit will be the Garmin Quest with new cradle and again the same mount. All of which I purchased through GPS CITY. THANKS GPS CITY!<br><br>P.S. 1st pic taken at Alto Pit OHV area in Arizona, 2nd and 3rd pic taken at Stoddard Wells OHV area in So. Cal. |
POSTED BY: Mike on September 10, 2005
CATEGORY: Motorcycle
VIEWS: 26604 |
| PLACES: alto pit, stoddard wells |
| TAGS: ubolt, honda, motorcycle mount, ram mount |
|
| RAM UBOLT MOUNT WITH LOWRANCE IFINDER PRO ON A HONDA VTX 1300 MOTORCYCLE |
|
|
Here are two pictures of my Lowrance iFinder Pro mounted on a Honda VTX 1300. I have the (RAM-B-149U & HOL-LO2 [113-30]) plastic iFinder and Brunton Atlas Cradle with the standard aluminum arm and RAM stainless steel U-bolt mount. It stays steady on the road and is great to check the turns (switch-backs) ahead. With the standard arm it moves it closer to see as you ride. It works out great as I can use the 12volt plug I have mounted on the windshield. I also use this set-up with a suction cup ball mount on the windshield when I am on the road trailering the bikes. |
POSTED BY: Richard on July 17, 2005
CATEGORY: Motorcycle
VIEWS: 25810 |
| TAGS: ubolt, honda, motorcycle mount, ram mount |
|
| RAM UBOLT MOUNT WITH GARMIN ETREX LEGEND ON A KAWASAKI NINJA 250 MOTORCYCLE |
|
|
I used a Garmin eTrex Legend with a RAM mount (u-bolt and 3" arm) on my Kawasaki Ninja 250 motorcycle. It works superbly! |
POSTED BY: Payne on May 24, 2005
CATEGORY: Motorcycle
VIEWS: 25294 |
| TAGS: kawasaki, ubolt, motorcycle mount, ram mount |
|
