The RAM-HOL-GA12 High Strength Plastic Cradle is designed to hold the Garmin GPS 60, GPSMAP 60C, GPSMAP 60Cx Series and Garmin Astro GPS Series. This includes the following Garmin GPS units,- Garmin GPS 60,
- Garmin GPSMAP 60,
- Garmin GPSMAP 60C,
- Garmin GPSMAP 60CS,
- Garmin GPSMAP 60Cx,
- Garmin GPSMAP 60CSx,
- Garmin Astro 220 Series.
All cables can stay connected to the unit while in the RAM cradle.
Placing Your Garmin GPS into the Cradle:First you need to attach the round belt clip button that is included with the purchase of the GPS unit, to the back of your unit. Next, place the bottom of the GPS into the cradle, and then clip the top of the cradle over the round button (previously attached) on the back of the GPS.
Included with the Garmin GPS Cradle:The cradle includes a set of two nuts and bolts to connect the cradle to any of the RAM compatible mounts.
Garmin GPS Mount Options:To help ensure you have the Garmin GPS 60, GPSMAP 60CS, GPSMAP 60CSx or Garmin Astro Series Mount you require, take a look at the list of available RAM Garmin GPS mounts on the Garmin GPSMAP 60CSx Mount Page or the Garmin Astro 220 Mount Page. Here you can select from suction cup GPS mounts, flat surface screw down GPS mounts, GPS car mounts, non skid weighted GPS mounts and more bundled with the RAM-HOL-GA12 Garmin GPS 60, GPSMAP 60CS, GPSMAP 60CSx or Garmin Astro Series Cradle.
Important Mounting Information:If you already own the cradle shown above, or any other cradle with a hole pattern that will match the RAM Diamond Plate hole spacing, then you require one of the RAM assemblies listed below. If you are looking to purchase a complete mount for the above cradle, take a look at the Complete Mount list.
The cradle does not ship with a RAM ball. To add a 1 inch ball to this cradle you need to purchase either the Aluminum Diamond Plate with 1 inch ball (RAM-B-238) or Plastic Diamond Plate with 1'' ball (RAP-B-238). If you need to mount this cradle on a 1.5'' ball system, you will require the Aluminum Diamond Plate with 1.5 inch Ball (RAM-238).
|
RAM ASSEMBLY LIST: Mount Assemblies to Connect Directly to the Cradles |
 |
| RAM Surface Mount Assemblies - Permanent |
RAM-B-138-CH
Chrome Plated Aluminum
Arm: 3.0'' Double Socket
Base: Round Plate
Cradle: Not Included |
RAM-B-138A-CH
Chrome Plated Aluminum
Arm: 1.75'' Double Socket
Base: Round Plate
Cradle: Not Included |
RAM-B-138
Powder Coated Aluminum
Arm: 3.0'' Double Socket
Base: Round Plate
Cradle: Not Included |
RAM-B-138-A
Powder Coated Aluminum
Arm: 1.75'' Double Socket
Base: Round Plate
Cradle: Not Included |
RAM-B-138-C
Powder Coated Aluminum
Arm: 5.25'' Double Socket
Base: Round Plate
Cradle: Not Included |
RAP-B-104
High Strength Plastic
Arm: 1.75'' Socket and Button
Base: Round Plate
Cradle: Not Included |
RAP-B-138
High Strength Plastic
Arm: 3.0'' Double Socket
Base: Round Plate
Cradle: Not Included |
|
|
|
| RAM Surface Mount Assemblies - Temporary |
RAP-273
High Strength Plastic
Arm: Direct Connection
Base: Adhesive Disk
Cradle: Not Included |
RAP-279B
Plastic/Rubber/Lead
Arm: 1.75'' Socket and Button
Base: Non Skid Base
Cradle: Not Included |
RAP-279F
Plastic/Rubber/Lead
Arm: 6.0'' Flex Rod
Base: Non Skid Base
Cradle: Not Included |
RAP-299-6DD
High Strength Plastic
Arm: 6.0'' Flex Rod
Base: Cup Holder Plug
Cradle: Not Included |
RAP-B-104A
High Strength Plastic
Arm: 1.75'' Socket and Button
Base: Adhesive Disk
Cradle: Not Included |
RAP-B-147
High Strength Plastic
Arm: 3.0'' Double Socket
Base: Adhesive Disk
Cradle: Not Included |
|
|
|
|
| RAM Rail Mount Assemblies - Motorcycles |
RAM-B-149-CH
Chrome Plated Aluminum
Arm: 3.0'' Double Socket
Base: S-Steel Rail U-Bolt
Cradle: Not Included |
RAM-B-149A-CH
Chrome Plated Aluminum
Arm: 1.75'' Double Socket
Base: S-Steel Rail U-Bolt
Cradle: Not Included |
RAM-B-149
Powder Coated Aluminum
Arm: 3.0'' Double Socket
Base: S-Steel Rail U-Bolt
Cradle: Not Included |
RAM-B-149-A
Powder Coated Aluminum
Arm: 1.75'' Double Socket
Base: S-Steel Rail U-Bolt
Cradle: Not Included |
RAM-B-149-C
Powder Coated Aluminum
Arm: 5.25'' Double Socket
Base: S-Steel Rail U-Bolt
Cradle: Not Included |
RAM-B-149Z
Powder Coated Aluminum
Arm: 3.0'' Double Socket
Base: Zinc Rail U-Bolt
Cradle: Not Included |
RAM-B-149Z-A
Powder Coated Aluminum
Arm: 1.75'' Double Socket
Base: Zinc Rail U-Bolt
Cradle: Not Included |
RAM-B-149Z-C
Powder Coated Aluminum
Arm: 5.25'' Double Socket
Base: Zinc Rail U-Bolt
Cradle: Not Included |
RAM-B-3091-238-CH
Chrome Plated Aluminum
Arm: 3.0'' Double Socket
Base: Clutch/Brake Adapter
Cradle: Not Included |
RAM-B-3091-238
Powder Coated Aluminum
Arm: 3.0'' Double Socket
Base: Clutch/Brake Adapter
Cradle: Not Included |
RAM-B-3091A-238
Powder Coated Aluminum
Arm: 1.75'' Double Socket
Base: Clutch/Brake Adapter
Cradle: Not Included |
RAM-B-3092-238
Powder Coated Aluminum
Arm: 3.0'' Double Socket
Base: 2x Ball Clutch/Brake Adapter
Cradle: Not Included |
RAM-B-108-GP1
Powder Coated Aluminum
Arm: 3.0'' Double Socket
Base: Strap Rail Clamp
Cradle: Not Included |
RAM-B-108-A
Powder Coated Aluminum
Arm: 1.75'' Double Socket
Base: Strap Rail Clamp
Cradle: Not Included |
|
|
|
|
| RAM Rail Mount Assemblies - Bike Light Duty |
RAP-274
High Strength Plastic
Arm: Swivel Connection
Base: Light Duty Rail Clamp
Cradle: Not Included |
RAP-B-104R
High Strength Plastic
Arm: 1.75'' Socket and Button
Base: Light Duty Rail Clamp
Cradle: Not Included |
RAP-B-149
High Strength Plastic
Arm: 3.0'' Double Socket
Base: Light Duty Rail Clamp
Cradle: Not Included |
|
|
|
| RAM Suction Cup Mount Assemblies |
RAP-224-1
High Strength Plastic
Arm: Direct Connection
Base: 3.25'' Locking Suction Cup
Cradle: Not Included |
RAM-B-166
Powder Coated Aluminum
Arm: 3.0'' Double Socket
Base: 3.25'' Locking Suction Cup
Cradle: Not Included |
RAM-B-166-A
Powder Coated Aluminum
Arm: 1.75'' Double Socket
Base: 3.25'' Locking Suction Cup
Cradle: Not Included |
RAM-B-166-C
Powder Coated Aluminum
Arm: 5.25'' Double Socket
Base: 3.25'' Locking Suction Cup
Cradle: Not Included |
RAP-B-166
High Strength Plastic
Arm: 3.0'' Double Socket
Base: 3.25'' Locking Suction Cup
Cradle: Not Included |
RAP-B-104-224
High Strength Plastic
Arm: 1.75'' Socket and Pivot
Base: 3.25'' Locking Suction Cup
Cradle: Not Included |
RAP-B-104S
High Strength Plastic
Arm: 1.75'' Socket and Button
Base: 3.25'' Locking Suction Cup
Cradle: Not Included |
RAM-B-148
Powder Coated Aluminum
Arm: 3.0'' Double Socket
Base: 4.0'' Suction Cup
Cradle: Not Included |
RAP-F-166
High Strength Plastic
Arm: 6.0'' Flex Rod
Base: 3.25'' Locking Suction Cup
Cradle: Not Included |
RAP-105-6D224
High Strength Plastic
Arm: 6.0'' Flex Rod
Base: 3.25'' Locking Suction Cup
Cradle: Not Included |
RAP-105-4DA224
High Strength Plastic
Arm: 4.0'' Flex Rod
Base: 2.25'' Locking Suction Cup
Cradle: Not Included |
|
|
|
| RAM Yoke Mount Assemblies |
RAM-B-121-238
Powder Coated Aluminum
Arm: 3.0'' Double Socket
Base: Yoke Rail Clamp
Cradle: Not Included |
RAM-B-121A-238
Powder Coated Aluminum
Arm: 1.75'' Double Socket
Base: Yoke Rail Clamp
Cradle: Not Included |
RAM-B-121C-238
Powder Coated Aluminum
Arm: 5.25'' Double Socket
Base: Yoke Rail Clamp
Cradle: Not Included |
RAM-B-125
Powder Coated Aluminum
Plate: Extension
Arm: 3.0'' Double Socket
Base: Yoke Rail Clamp
Cradle: Not Included |
|
|
|
